433MHz Universal remote control – 1-channel 12V relay receiver module with 4 EV1527 transmitters and code learning function.

Powerful 433 MHz Radio Signal

The DieseRC wireless radio remote control switch utilizes 433 MHz radio technology and has a strong signal that penetrates walls, floors, and doors. The EV1527 learning code chip increases system security. You can reliably control any device connected to the relay receiver from anywhere in the world via the transmitter.

Easy Operation

Extremely easy to set up and reset. Four operating modes. Various operating modes are available (momentary, pendulum, latching, and timer operation). You can easily adapt the relay to your needs. The operating mode is adjustable. The relay has three terminals (NC/COM/NO). The device is already configured for latching operation. Press the "ON" button to turn the relay on and the "OFF" button to turn it off.

Wide Range of Applications

These products are suitable for use in private homes, farms, factories, offices, laboratories, supermarkets, etc. The application areas for wireless remote controls range from simple remote controls for the home to system automation, e.g. For example, electric door locks, alarm systems, access control systems, electromagnetic doors, lamps, lighting, ventilation systems, signal transmission and self-built remote controlled switches. src="https://cdn.manomano.com/external-resources/AAHKMJXYDAFdJAOAIMEbOAchlkWZ0oakZn_uVZ0mPidMNbILvCvspZ4oG3fPgIqc1P26RdPiG8KHKUtblW5_ULKvLD1OHzwX-jolGWPZGyLZfO7VJDBbIm3UmGi_nQcIt3uWVSi6aBs2AIFEJhdInCINbKSb9AYpHJWEXw6if9wGJCdNDDcifwIwuzxJvGSbrilWQX5ZU-29yoRJAo_tVnVv" alt="Remote control receiver relay 1201 10A, 1 channel, 10A NC/COM/NO" data-orig-src="https://m.media-amazon.com/images/S/aplus-media-library-service-media/ed9d0189-58c5-4aa5-865a-22364b9cdddc.__CR0,0,300,400_PT0_SX300_V1___.jpg"> 

• Receiver operating voltage: 12 V DC
• Input/output voltage: 1 ~ 250 V; Maximum current: 10 A; RF frequency: 433 MHz; Supported encoding: 1527 learning code; Receive sensitivity: >97 dBm; RF operating mode: ASK superheterodyne reception; Operating temperature: -30 °C to +80 °C; Receive range: Open area >50 meters; Preheating current: <5 mA src="https://cdn.manomano.com/external-resources/AAHKMJXYDAFdJAOAIMEbOAchlkWZ0oakZn_uVZ0mPidMNbILvCvspZ4oG3fPgIqc1P26RdPiG8KHKUtblW5_ULKvLD1OHzwX -jolGWPZGyLZfA1wHdo7sC3c0bmW9fdpKoQSQPWi7SLdvMrGueIGuJpe9tiG7Qosb_AFzkGB BfTmpHvR2CBuFBokiaf2Rtu_XL2uVR3hbPR3elGwW3rxF6sA6pXEcVLkxd-nTNHNSm4fSg==" alt="Momentary mode M, easy to install" data-orig-src="https://m.media-amazon.com/images/S/aplus-media-library-service-media/ed25ed71-5811-4699-b8dd-a4f8672cbb85.__CR0,0,1500,1500_PT0_SX300_V1___.jpg">

Momentary Mode

Press and hold the button to activate the relay. Release the button to deactivate the relay.

Install

1. Press the learn button (on the receiver) once. Wait 3 seconds.
2. Press any button on the remote control.
3. Operation completed successfully.

Change Mode

Press the button to activate the relay; press this button again to deactivate it.

Install

1. Press the learn button (on the receiver) twice. Wait 3 seconds.
2. Press any button on the remote control. Operation successfully completed.

Lock Mode

Press the "ON" button to activate the relay. Press the "OFF" button to deactivate the relay.

Installation

1. Press the learn button (on the receiver) three times.
2. Wait 3 seconds.
3. Press the "ON" button on the remote control. Wait 3 seconds.
4. Press the "OFF" button on the remote control. Operation successful.

Time Delay Mode

Hold button: The relay is activated; Release button: The relay deactivates after 5 seconds (or 10/15/20 seconds).

Installation

1. Press the learn button on the receiver 4 times (or 5/6/7 times). Wait 3 seconds;
2. Press any button on the remote control. Successful.