1/5
433MHz Wireless Switch, DC6V-36V Receiver & DC5V-24V Transmitter, Remote Control for Door, Floor, Wall – Small PCB
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by Qiudie-homelavafans
You may also like
Compare with similar items
Product information
Description
Features:
1. DC6V-36V Receiver: DC6V-DC36V receiver input, miniature, the learning point is matched with the transmitter on the receiver, the low voltage relay is inward, the superheterodyne receiver module has high receiving sensitivity and good anti-interference performance.2. DC5V-24V Transmitter: This is a radio frequency transmitter board without shell and buttons, just input DC5V-DC24V power into it, it can transmit signals, it is a miniature transmitter module to learn code receiver.
3. Stable signal: The transmitter module can be controlled by smoke detectors or other sensors or microcontrollers. The radio frequency remote control adopts radio frequency technology and the signal is stable.
4.Wide range: The mini RF switch signal can pass through walls, floors, and doors, stably controlling the receiver from anywhere within a reliable distance, with a maximum range of 100 meters without obstacles.
5.Change.Lock and adjust by connecting different points
Transmitter:
Working voltage: DC5V-24V
Modulation mode: On demand
Working frequency: 433MHz
Working current: 8-10mA
Transmission power: 21mW
Coding type: Learning code (EV1527)
Transmission distance: REPRX. 10-100m / 32.8-328ft
Receive sensitivity: 108 dBm
How to use:Momentary: Press the button to open. Release your finger, the button closes. Toggle: Press one button at a time to activate. Press the same button again to deactivate. Momentary: Connect the learning button. The receiver's LED indicator flashes twice, indicating successful replacement. Bouette: Connect the learning button. The receiver's LED indicator flashes once, indicating successful replacement. Learning Code: Apply 12V to the receiver, connect the learning button, and the receiver's LED indicator will illuminate. Press the remote control button once; the LED indicator will flash once. Press the remote control button again; the LED will flash once, indicating successful learning. Compensation Code: Connect the learning button. Until the receiver's LED indicator flashes 5 times, indicating a clear code.
Package List: 1 x Receiver 1 x Transmitter
Features
- BrandOTHERS
- Pcs per pack1
- ColourMulticolour
- MaterialPlaster
- Type of electronic componentSensors
- ManoMano ReferenceME242423417
- MMID441154342225
- Product codeQD-GB26Y57424
- EAN5002098274146
You are here:



















