4PCS Universal 433 MHz Gate Remote Control, Garage Door Duplicator, 4-Button Wireless Garage Door Remote Replacement, Garage Door Cloning for Electric Doors

Wide Compatibility: This universal remote supports multiple codes, including 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), SC5262 series, HT600, HT680, HT6207, HT6010, HT6012, HT6014, and SMC918. Despite the different chip model prefixes from various manufacturers, it ensures versatile applications.

【Erase and Copy Codes】 Erasing data and copying codes is easy. Press both top buttons simultaneously until the LED flashes to erase the data.

During pairing, hold the original remote in one hand and the duplicate door remote in the other. Bring the two remotes as close together as possible (ideally, place them side-by-side on a table at zero distance), press the corresponding buttons for copying, and the LED indicator will flash three times rapidly followed by a single rapid flash, indicating successful pairing. 【Multifunctional】 Check the IC code of your original door remote to ensure compatibility. This 4-in-1 fixed-frequency replicator operates at 433 MHz. It can be used to control electric doors, garage doors, telescopic doors, sliding doors, gates, and roller shutter doors. Check the frequency calibration before purchasing to avoid compatibility issues. 10m Range: Enjoy a seamless connection with our garage door remote using a 433 MHz wireless RF frequency. It provides a reliable, interference-free signal that can penetrate walls, doors, and floors up to 10 meters for easy remote access. The sliding cover prevents accidental activation. The compact design fits easily on keychains, wallets, and backpacks, offering convenience and security. Product size: 5.8*3*1.2 cm. How to use: 1. Code clearing method: Press the unlock and lock buttons simultaneously (some cases have the top and bottom buttons). After the LED indicator flashes three times, release one button while keeping the other pressed, then press the released button three times. The LED indicator will enter a rapidly flashing state. At this point, all memory data is erased. The cleaned remote control will have no LED indicator light, regardless of which button you press. 2. Copying Method: One hand holds the original remote control, while the other holds the copy remote. The two remotes should be placed as close as possible (ideally, they should be placed side-by-side on the desk with no distance between them). Each remote presses the copy button. When the LED indicator flashes rapidly after three flashes, the copy is successful. The other key operating methods are the same. Some remote controls have lower transmission power, so the original remote control should be placed on top of the copy remote before use. If there is any noise, avoid interference to ensure proper operation. If the copy fails, it must be copied again after clearing the code. Note: All data is measured manually; please allow for a 1-3 cm error due to differences in lighting and display. There may be slight color variations; please refer to the actual item received.