5-piece set of 500cc oil syringes, gear oil and brake antifreeze extractor - manual tool pump, syringe-type filling pump

【Superior Plastic Material & Equipped with Spare Parts】High-quality EPDM oil syringe, durable material, double integrated rubber cushions, fits snugly on the piston to prevent leaks. Two spare rubber rings can extend the life of the oil pump. Easy to clean and reusable. 【Locking Design】Simply push the hose into the end of the pump and it automatically locks in place. So you never have to worry about pulling it out or blowing it out when using the pump to fill things. Extended syringe tubing, easy to pull or inject liquid, and the hose is detachable. 【Easy to Use】A simple syringe-type action using the manual fluid extraction pump can quickly and easily extract and refill fluid in both directions via a differential extractor dispenser. Ideal for emptying and refilling the main reservoir and other reservoirs, the transparent bottle body with scale allows you to check the extraction liquid level at any time for better control of the extraction quantity. 【Wide Application】Ideal for extracting or changing engine oils or lubricants in ATVs, boats, agricultural equipment, industrial gearboxes, motor vehicles, motorcycles, RVs, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical-resistant oils, brake fluid, diesel fuel, coolant, hydraulic and water systems, etc. 【Speed and Quality】Local warehouse, fast delivery, available immediately. Package List: 1x Suction Syringe 2x Connecting Hoses 2x Rubber Rings Instructions for Use You can easily remove the hose if you need to change or replace it, or if you simply want to remove it for storage. It has a spring that moves slightly and allows you to easily remove the hose. Pulling backward may not be obvious, and some people will pull very hard to remove the hose. 2. It can be used to pump liquids rather than to aspirate them. 3. It is easy to disassemble and clean to avoid cross-contamination of different fluids (such as oil and antifreeze). 4. It is also practical for filling or topping up tanks located in places where you cannot easily access a bottle. If you apply too much force (which, initially, can be difficult with some tools), the hose may detach due to pressure transfer; therefore, you must pull it slowly to prevent this from happening. If a liquid leak occurs, you should check if the hose is properly installed, and you can readjust and reinsert it.