- 500 solder terminals, heat shrink tubing

Description of the product: Function: Temperature specification Minimum fusion temperature: 138°C Minimum compression temperature: 80°C Washing temperature: -55℃-125℃ Compression temperature > 160°C Material: PE, sold Product name: You can choose it heating temperature Voltage mass: 600V Material in polyethylene Recovery: 2:01 Rigidity of die: 1kW Protection rating: IP67 include: 200 thermorestringent connectors red 180 thermorestringent connectors blue 80 thermorestringent connectors white connectors 40 thermorestringent connectors Gialli Characteristiche: Progettato all'esterno del tube in poliacrylico e all'into con un adesivo termico, crea una tenta stagna durvole tra fili e connettori. ● I connect thermorestringents to prevent corrosion and negligent ambient conditions at higher humidity. Characteristics: ● The transparent color of the test connector allows visual inspection.--- It is possible to control the temperature of the food and the temperature of the cooking. ● Easy identification: various colors for various connector dimensions ● Can be used perfectly in marine and automobile applications. Characteristics: ● I have consented to use in difficult environments or limited spaces. Not that there is a rich configuration, it is sufficient to position the naked wire on the heat source and apply heat to complete the connection. Collection, insulation and sigillatura simple in one passaggio del filo. Characteristics: ● Protection of the insulation: used to signal the threads, prevent electrical loss and impede the power supply interfering with the circuit ● When the salt ring is riscaldato, if found and damaged by the thread, impeded effectively rottura del collegamento. Come if usa: 1.Before passing the wire through the end of the connector tube to the end of the corretta dimension, secure it and handle the wire correctly and post the connector in the same way as the part of the ring of the wire if it is aligned with the wire bonding; 2. Use a termica gun to tap the end of the tube in a restrictive mode. The ring has a slight risk if it turns into a waterproof ring; Come if usa: 3. Leave the salt ring with a thermal gun until it is formed and penetrates the connection of the wire; Advice: Leave the condom section to be stored at the end when it is not subject to the cost attached to the filo; Excessive riscaldamento requires complete riscaldamento riscaldamento. The salt ring must be heated accurately to access the connection of the film. Confezione contents: Set of salt rings * 1 Main points: 1.The dimensions of the product are set manually, may be adjusted by error 2. Poiché monitor diversi visualizzano colori di diversi, fare riferimento al colore effectitivo revuto. 3. If prega di confirms the dimensioni prima dell'acquisto.