52mm 4-in-1 Multifunctional Gauge, Digital Display, Fuel Level, Oil Pressure, Water Temperature, Voltmeter with Backlight for Boat RV 81000329, Silver Bezel, Dial

Features: 1. STABLE PERFORMANCE: Made with a 316L stainless steel bezel and curved glass, this gauge is suitable for use in acidic and humid environments with an anti-fog function. IP67 waterproof and dustproof, ideal for marine and harsh environments. 2. ACCURATE DIGITAL DISPLAY: High accuracy, high repeatability, and an easy-to-use digital display with a red backlight for nighttime viewing on the boat ensure accurate and reliable readings. 3. 4-IN-1 DESIGN: Get information on oil level, oil pressure, water temperature, and voltage with a single gauge, reducing the number of devices and saving space, especially suitable for limited spaces on boats, yachts, RVs, etc. 4. IMPROVED DATA READING: Increase efficiency with this gauge that eliminates the need to switch between different gauges. Easily view oil level, water temperature, and voltage data at a glance for convenient use. 5. MULTIFUNCTIONAL: Featuring a wide operating voltage range of 9 to 32V DC, low power consumption, and a fast start-up time. The pressure-connect design ensures a secure fit, suitable for various vessels subject to high vibration. Specifications: Item Type: Boat Gauge Material: 316L Stainless Steel Bezel + Anti-Fog Glass Protection Rating: IP67, Fully Waterproof with Excellent Anti-Fog Function Display: Fuel Level + Oil Pressure + Water Temperature + Voltage Backlight Color: Red (Default), Green, Blue, White, Yellow, Yellow-Green, Orange, Purple (Color Changeable) Operating Voltage: 9-32 VDC Operating Current: ≤60 mA Operating Temperature: -30°C to +70°C Storage Temperature: -40°C to +85°C IP Rating: IP67, Can Operate Under Water to 1m Fitment: For Boats, Yachts, RVs, Trucks, Motorcycles Wiring: 1. Red Wire: +9-32VDC 2. Black Wire: Oil Level Signal Input 3. Orange Wire: Backlight (+) 4. Blue Wire: Negative Power Supply (-) 5. White Wire: Pressure Signal Input 6. Purple wire: Water temperature signal input. How to use: Installation steps: Step 1: Drill a 52-53 mm diameter hole in your center console or other pre-installed location, leaving at least 70 mm of clearance behind it! Step 2: Place the gauge in the drilled hole. Step 3: Align the screw holes on the bracket with the screws on the back of the gauge, then tighten with screws, securing the panel to the bracket and frame. Step 4: Connect the power harness directly to the back of the gauge's wiring interface, then connect the corresponding sensors and harnesses according to the provided instructions and connect the power. Gauge function instructions: 1. Briefly press the Mode button once (less than 1 second) to change the backlight color: red (default), green, blue, white, yellow, yellow-green, orange, purple backlight sequence. 2. Press and hold the Mode button (> 4 seconds) to access settings mode. Briefly press the button (less than 1 second) to cycle through the gauge settings. After selecting the desired gauge for adjustment (the corresponding digital display will flash), press and hold the button again (> 2 seconds). The gauge settings will cycle through, for example, the fuel level gauge settings can be selected from FO1 to FO5, and the pressure gauge settings can be selected from P01 to P05. 3.Once you have selected the parameter group to which the gauge needs to be adjusted, release the button. After 45 seconds of inactivity, the data will be automatically saved and the gauge will exit adjustment mode, returning to normal display mode. Package list: 1 x gauge, 1 x wire, 1 x mounting base, 2 x nuts, 1 x user manual. Note: Ensure there is at least 70 mm of clearance behind the opening once it is made!