1/5
5A DC Motor Drive Module, CW CCW Rotation, PWM Regulation, Double H-Bridge
Of which environmental contribution £0.10 including VAT.
Buying for your business?
Negotiated prices excl. VAT up to -20%
Sold by YUSONG-UK
You may also like
Compare with similar items
Product information
Description
Feature:
1. Can independently control two motors, each channel can output 5A, higher 9A, standby current is only 10UA.2. The wide power supply range is 3-14V, the signal power range is 2.2-6V, and the levels of 3.3V and 5V can be satisfied.
3. The board provides 3.3V 100mA power to meet the power consumption of your control system.
4. The two-way H-bridge motor can drive two DC motors or a 4-wire in-phase stepper motor at the same time.
5.There is a print prompt on the back of the circuit board to indicate the pole.
Specification:
Item type: dual motor drive modulePower module: 3~14V
Signal input voltage: 2.2~6V
Installation hole diameter: 2mm/0.08 inch
Weight: 14 g / 0.49 oz (approximately)
Package list:
1 x driver moduleNote:
When the motor is communicating, it must wait for the motor to stop first, otherwise the instantaneous current will burn the driver chip of the module. The exposed pins on the back of the board should not be short, otherwise permanent damage may occur. Do not connect the positive and negative poles of the power supply, otherwise it will burn out.There is a printing prompt on the back of the circuit board.-Contact our customer service in case you need further assistance
Features
- BrandOTHERS
- ColourWhite
- Pcs per pack1
- MaterialPlaster
- Motorisation accessory typeControl box
- Motorization useFor gate
- ManoMano ReferenceME243007658
- MMID287503202033
- Product codeYS-UK26Z76457
- EAN4010876863575
You are here:


















