5m 250V 10A Float Switch for Round Submersible Pump

5 m connection cable.

Protection class: IP68, max. 250 V 50/60 Hz

Max. switching angle: +/- 50°, max. operating temperature 50°C

If the pump has a power greater than 1.1 kW: it will be necessary to install

a standard relay or an upstream power contactor.

This hollow float is lifted and pushed upwards by the rising liquid until the switch is activated at an angle of 50° to the horizontal. The float can be secured by screwing it into the side or, if you have an open tank, by placing it from above on the liquid. The switching point can be set very precisely thanks to the ballast weight that comes standard. Suitable for almost all pumps.

The float is ideal for monitoring the fill level of any liquid that does not attack its materials, regardless of the degree of contamination. This float can be used as a full or empty indicator, to control pumps or valves, or for other alarm signals.