5m 250V 10A Round Float Switch for Submersible Pump - LIAIKI

5m connection cable.

Protection rating: IP68, max. 250V 50/60Hz

Max. switching angle: +/- 50°, max. operating temperature 50°C

If your pump has a power rating greater than 1.1 kW: You will need to install

upstream a suitable relay or power contactor.

This hollow float is lifted and pushed upwards by the rising liquid until, at an angle of 50° to the horizontal, the pump is activated. The float can be attached by screwing it to the side or, if you have an open tank, by placing it on top of the liquid. The switching point can be precisely set thanks to the ballast weight included as standard.

Suitable for almost all pumps. The float is ideal for controlling the fill level of any non-corrosive liquid, regardless of the degree of fouling. You can use this float as a full/empty indicator, to control pumps, valves, or as other alarm signals.