5m 250V 16A Float Switch for Submersible Pump

A de-float is a hollow float that operates on the principle of upward force. This hollow float is lifted and pushed upwards by the rising liquid until it forms a 50° angle with the horizontal. The float can be screwed onto the side or, in the case of open tanks, placed above the liquid. The switching point can be precisely adjusted using the ballast weights supplied as standard. Suitable for almost all pumps. The float allows you to check the fill level of any liquid, regardless of its dirt content, without damaging the material. The float can be used as a full/empty level indicator to control pumps, valves, or other alarm signals. If the pump has a rated power exceeding 1.1 kW, a commercially available power connector or relay must be installed upstream. Three-phase 380/400V pumps can be used with a 380V power connector. Packing list: 1 x 5m 250V 16A float switch for submersible pump (other products not included). Measurements are taken manually; please allow for a 1-3cm error. Color may vary depending on lighting; please refer to the actual product received.