6-Port 1S LiPo LiHv Charger for Power Tools with Undervoltage Protection, EU Plug 100-240V

Features:1.INDEPENDENT AND INTERFERENCE-FREE: Each charging channel is independent, so there's no need to worry about voltage differences between batteries, and the charger is protected against low voltage (safe termination voltage of 3.6V per port).
2.STURDY CASING: The 1S Lipo LiHv charger's lithium battery casing is made of excellent plastic material, making it sturdy, stable, and suitable for your use.
3.SAFE AND RELIABLE: The smart battery charger uses excellent flame-retardant materials, combined with a variety of technologies, to effectively prevent the battery from overcharging, overcurrent, overvoltage, overheating, and short circuits, eliminating your worries about fire, explosion, and battery leakage.
4.WITH LED INDICATOR: The 6 LEDs independently indicate the charging status of the six channels; solid LEDs indicate charging, and off LEDs indicate a full charge.
5.CHARGE INFORMATION: The input voltage range is 7V to 27V (2S to 6S), the maximum charging current is 0.4A (per charging port), and six 300mAh 1S 3.8V to 4.35V batteries should take approximately 20 minutes to fully charge.
Specifications:Item Type: Charger Board
Material: PCB
Supported Batteries: 1S 4.20V, 3.7V LiPo and 4.35V, 3.8V LiHV
Output Connector: 12V 2A DC55x25 or XT60
Maximum Charging Current: 0.4A (per charging port)
Estimated Charging Time: 6 x 300mAh 1S 3.8V Battery Packs 4.35V fully charged, approximately 20 minutes
Supported battery connectors: BT2.0 and PH2.0
Battery type: LiHV 4.35V and Lipo 4.2V

How to use:Each charging channel is independent, so you don't have to worry about voltage differences between batteries. This charger features low-voltage protection (safe termination voltage of 3.6V per cell) to prevent excessive discharge of the input power. Steps to use: 1. Power the charger with a 12V AC adapter or a 2S-6S battery. It will initially display "-3p", then show the input voltage. 2. Set the battery type switch according to the type of battery being used (LiHV or LiPo). 3. Press the button to set the 3-digit LED display to match the input power type. This step will activate the low-voltage protection to prevent excessive discharge of the input power batteries. Final voltage: 3.6V per cell. The discharge protection voltages are therefore as follows: 12/2A AC adapter input: "-DC" 2S battery input: "-2P", 7.2V termination 3S battery input: "-3P", 10.8V termination 4S Battery Input: "-4P", 14.4V terminal 5S Battery Input: "-5P", 18V terminal 6S Battery Input: "-6P", 21.6V terminal 4. When the screen displays the correct input, simply wait 3 seconds without any action; the setting will complete automatically. The charger will then display a stable input voltage. 5. All 6 LEDs will flash. You can then insert the battery and the chain will begin charging automatically. Do not use BT2.0 and Ph2.0 simultaneously on the same channel. Charging Status: Standby mode when the battery is not inserted: Flashing green Charging: Solid green Charging complete: Green off If the input type needs to be adjusted during charging, it can be changed again by pressing the button.
Package List:Package includes: 1 x Charger board
1 x Adapter
1 x User manual