868.3 MHz BS garage door opener, remote control compatible with Hörmann BS HSM4 HSE2 HS1 HS4 HSZ1 HSZ2, 2-piece handheld transmitter

This garage door remote control is a replacement part rather than an accessory. We recommend that you refer to the list below for compatibility with your device before purchasing. Compatible only with the following 868 MHz blue handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, RollMatic, RollMatic, VersaMatic, LineaMatic. 4-button Mini Bisecur BS handheld transmitter, with a metal protective cover to prevent accidental button presses. And it's small enough to fit easily on a keychain, bag, or backpack, making it easy to carry. This is a replacement garage door opener, not an original part. Special note: If your original remote is not listed, please do not purchase it, even if it's an 868 MHz remote. Two programming methods: copying the code from your existing remote or programming via the receiver. Note: It has built-in scrolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. This garage door opener is a replacement part, not an accessory. We recommend you refer to the list below for your device's compatibility before purchasing. Compatible only with the following 868 MHz blue handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Compatible with Hörmann garage door openers: SupraMatic, ProMatic, ProMatic Battery, RollMatic, aMatic Red, VersaMatic, LineaMatic. This 4-button Mini Bisecur BS handheld transmitter features a protective metal cover to prevent accidental button presses. It's small enough to fit easily on a keychain, bag, or backpack, making it convenient to carry. This is a replacement garage door opener, not an original part. Special note: If your original remote is not listed, please do not purchase this remote, even if it is 868 MHz. Two programming methods: copying the remote's code / programming via receiver. Note: Built-in scrolling codes (blue LED)! If your original remote uses fixed codes (red LED), this remote will not work. 868 MHz replacement garage door remote, compatible with remotes HSE-4-868-BS, HSE2-868-BS, HS4-868-BS, HS1-868-BS, HSS4-868-BS, HSP4-868-BS. Compatible models: HS1-868-BS, HS4-868-BS, HS5-868-BS, HSE1-868-BS, HSE2-868-BS, HSE4-868-BS. HSP4-868-BS. HSD2-868-BS. For HSS4-868-BS. Note: Built-in scrolling codes (blue LED)! If the original remote uses fixed codes (red LED), it will not work. How to program: 1) Press and hold the button on the new remote you want to program the code from the original remote. Press and hold another button three times until the red LED light illuminates for 10 seconds, then release all buttons. 2) Place the original remote as close as possible to the left side of the new remote. 3) Press the button on the original remote. You must copy the code until the LED flashes alternately red and blue. Check if the LED on the new remote is flashing blue. If not, try moving the new remote as close as possible to the original remote. 4) When the blue light on the new remote flashes rapidly, the learning process is complete. Release all buttons. 5) Please repeat the same procedure for the remaining buttons. Reset method: Each button on the remote control is assigned a new radio code via the following steps. (1) Remove the battery for 10 seconds. 2) Press and hold a button on the remote control. (3) Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will remain solid blue. (4) When you release the button on the remote control, all radio codes will be reassigned. Note: If the remote control button is released prematurely, no new radio codes will be assigned.