868 MHz garage door remote control – 2-pack, compatible with models 4020, 4026, TX03-868-4 and TX03-868-2

• [Compatible Models]: Compatible with 4020 TX03-868-4, 4026 TX03-868-2, 4020V000, 4026V000, 4021, 4025/4025V000, 4031/4031V000, 4035/4035 4000 00 40 35V 002. Please do not purchase if your model is not listed.
• [Attention]: Replacement part for garage door opener, not an original garage door opener. Please check compatibility with your original model before purchasing. If your original remote control is not listed, please do not purchase this one. Frequency: 868 MHz, Transmission range: 50 m, Pairing required. 4 buttons to control up to 4 garage door openers. High-quality material: Stainless steel, shock and scratch resistant for long service life. The sliding cover prevents accidental activation and increases operational safety.

Product Features

Frequency: 868 MHz, 868.3 MHz.
Number of Buttons: 2 Channels.
Battery Type: CR2032 Battery.
Compatible Models:
4020 TX03-868-4
4026 TX03-868
4020V000
4026V000

Note: Not compatible with other brands and frequencies.

Programming:

Remove the code from the new remote control to program it. This increases the success rate.
Deleting Codes:

Press and hold the learn button or receiver code button until the first LED flashes slowly and then remains lit until the next LED flashes slowly. The second LED will then light up. This means the code has been removed.
Programming:

1. Locate the learn button or code key on the radio receiver or door reader and press it briefly. The LED on the driver will light up.
2. Press and hold the desired button on the remote control until the learn LED flashes rapidly. Release the button; the LED on the driver will turn off.
3. The remote control has been successfully programmed for the user and is now ready for use.