868 MHz garage door remote control, compatible with Hörmann HSE2/HSM4/HS4 2-channel garage door remote controls, set of 2

This garage door remote control is a replacement part and not an original accessory. We recommend that you check the device compatibility list below before purchasing.
Compatible Models: Our remote control is only compatible with the following Hörmann models: HSM2/4 868, HS1/2/4 868, HSE2/4 868, HSZ1/2 868, HSP4/-c 868, HSD2-A/-C 868. Compatible Motor Model: Supramatic e2
Compatibility: Our replacement garage door remote controls are only compatible with Hörmann remote controls with a blue button and an 868 MHz frequency. See the model number below for further details. Remote controls with other colors and frequencies are not compatible. Please do not buy this remote control!
Easy operation with instructions – Instructions are included. Lightweight and easy to carry, it can also be attached to a backpack as a decoration.
Customer service – All our garage door opener remote controls undergo a quality check before shipping. If you have any questions about our remote controls, please contact us. We offer a replacement or refund.

Product Description

Product Description

Technical Data:

• Number of Channels: 2
  
• Dimensions: 60 x 30 x 12 mm
  
• Material: ABS
  
• Wireless Transmission Range: 50–150 m (outdoors)
  
• Frequency: 868 MHz

• 100% compatible with the following remote control models:
  

  Compatible with Hörmann HSM2 868, HSM4 868
  

  Compatible with Hörmann HS1 868, HS2 868, HS4 868
  

  Compatible with Hörmann HSE2 868, HSE4 868
  

  Compatible with Hörmann HSZ1 868, HSZ2 868
  

  Compatible with Hörmann HSP4 868, HSP4-c 868
  

  Compatible with Hörmann HSD2-A 868, HSD2-c 868

  Compatible motor models 100%:
  

  Compatible with Hörmann Supramatic E2

  Programming:
  

  Copy original remote control
  

  Step 1: Clear the copier history
  

  1. Press and hold buttons 4 and 2 until the LED flashes 3 times.
  

  2. Release button 2 (continue holding button 4) and slowly press button 2 3 times; The LED is flashing.
  

  3. Release button 4 and complete the code validation.
  

  Step 2: Copy the code from the original remote control
  

  1. Place the copier as close as possible to the original remote control.
  

  Press and hold button 1 on the original remote control, then press button 1 on the copier until the LED on the copier flashes.
  

  3. Release both buttons; the code has been copied. Copy the other button in the same way.