868.3 MHz gate remote control – 2-pack white units Compatible with Hörmann systems (HSM4, HSE2, HS1, HS4, HSZ1, HSZ2)

Compatibility Note: This remote control is a replacement and is only compatible with devices that use rolling code (blue LED). Please check the compatibility list before purchasing. Not suitable for fixed code systems (red LED).
Exclusive Models: Only compatible with the following 868 MHz handheld transmitters (blue): HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS.
Easy Programming: Copy the code from your original remote control or connect directly via the receiver. Note: For use with rolling code (blue LED) only!
Reliable Technology: 868 MHz frequency, 4 channels, and blue LED. Despite similar construction, not compatible with other frequencies. Security and quality: Control up to 4 doors with rolling code protection. Robust metal housing, durable and more attractive than plastic remotes. Compatibility note: This remote is a replacement unit and is only compatible with rolling code (blue LED) devices. Please check the compatibility list before purchasing. Not suitable for fixed code (red LED) systems. Exclusive models: Compatible only with the following 868 MHz handheld transmitters (blue): HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. Easy programming: Copy the code from the original remote or connect directly via the receiver. Note: For use with rolling code (blue LED) only! Reliable technology: 868 MHz frequency, 4 channels, and blue LED. Not compatible with other frequencies, despite similar design. Security and quality: Control up to 4 doors with rolling code protection. Robust metal design, durable and more attractive than plastic remotes.

Note: Integrated rolling codes (blue LED)!

If your original remote control uses fixed codes (red LED), this remote control will not work.

Compatible Models

For HORMANN HS1-868-BS

For HORMANN HS4-868-BS

For HORMANN HS5-868-BS

For HORMANN HSE1-868-BS

For HORMANN HSE2-868-BS

For HORMANN HSE4-868-BS

For HORMANN HSP4-868-BS

For HORMANN HSD2-868-BS

For HORMANN HSS4-868-BS

Programming? Press and hold the button on the new remote control. To program the code from the old remote, press and hold the button on the old remote, then press a different button three times until the red LED lights up for 10 seconds. Release all buttons. Place the old remote as close as possible to the left of the new remote. Press the button on the old remote. You must copy the code until the LED flashes alternately red and blue. Check if the LED on the new remote is flashing blue. If not, try holding the remote as close as possible to the original remote. When the blue LED on the new remote flashes rapidly, programming is complete. Release all buttons. Repeat the process for the remaining buttons. Reset Method: Each button on the remote will be assigned a new radio code by following these steps. Remove the battery for 10 seconds. Press and hold a button on the remote. Reinsert the battery. The LED will flash blue slowly for 4 seconds. The LED will flash blue rapidly for 2 seconds. The LED glows blue for a long time.

• When you release the remote control button, all radio codes are reassigned.

• Note: If the remote control button is released too soon, no new radio codes will be assigned.

  Technical specifications: Frequency: 868.3 MHz, Channels: 4, Code: Rolling Code, Battery: CR2430 battery included, 868.3 MHz gate remote control