868MHz Gate Remote Control, Compatible with Hörmann, 2 Channel Garage Door Remote Control for Hörmann HSE1/HSE2/HSE4-868-BS, HS1/HS4/HS5-868-BS, HSP4-868-BS (Pack of 2)

【Important Compatibility】This remote control is a replacement and is only compatible with rolling code (blue LED) devices. Please check the compatibility list before purchasing. Not suitable for fixed code (red LED) systems! 【Exclusive Models】Only compatible with the following 868 MHz blue handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. 【Easy Programming】Copy the code from your original remote or connect directly via the receiver. Caution: Only usable with rolling code (blue LED)! 【Reliable Technology】868 MHz frequency, 2 channels, and blue LED. Not compatible with other frequencies, despite a similar design. 【Security and Quality】Control up to 4 gates with rolling code protection. Robust metal design, durable and more aesthetically pleasing than plastic remotes. 【Compatibility Note】This remote is a replacement and is only compatible with rolling code devices (blue LED). Please check the compatibility list before purchasing. Not suitable for fixed code systems (red LED)! 【Exclusive Models】Only compatible with the following 868 MHz blue handheld transmitters: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS. 【Easy Programming】Copy the code from the original remote or connect directly via the receiver. Caution: Only usable with a rolling code (blue LED)! 【Reliable Technology】868 MHz frequency, 2 channels, and blue LED. Not compatible with other frequencies, despite a similar design. 【Security and Quality】Control up to 4 gates with rolling code protection. Robust metal design, durable and more aesthetically pleasing than plastic remotes.

Note: Integrated rolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work.

Compatible Models: For HORMANN HS1-868-BS. For HORMANN HS4-868-BS. For HORMANN HS5-868-BS. For HORMANN HSE1-868-BS. For HORMANN HSE2-868-BS. For HORMANN HSE4-868-BS. For HORMANN HSP4-868-BS. For HORMANN HSD2-868-BS. For HORMANN HSS4-868-BS. How to program? 1) Press and hold the button on the new remote control. If you want to program the code from the original remote control, press and hold it. Then, press another button three times until the red LED light illuminates for 10 seconds, then release all buttons. 2) Place the original remote control as close as possible to the left side of the new remote control. 3) Press the button on the original remote control. You must copy the code until the LED flashes red and blue alternately. Check that the LED on the new remote control is flashing blue. If it isn't, try moving the new remote control as close as possible to the original remote control. 4) When the blue light on the new remote control flashes rapidly, the programming is complete. Release all buttons. 5) Repeat the same procedure for the remaining buttons. Reset Method: Each button on the remote control is assigned a new radio code by following these steps: (1) Remove the battery for 10 seconds. (2) Press and hold a button on the remote control. (3) Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will remain solid blue. (4) When you release the remote control button, all radio codes will be reassigned. Note: If the remote control button is released prematurely, no new radio codes will be assigned.