868MHz Gate Remote Control, Handsender for Hormann HSE2-868-BS, HSE-4-868-BS, HS1-868-BS, HS4-868-BS, HSS4-868-BS, HSP4-868-BS, 4 Channel Gate Remote Control (Pack of 3)

【Compatibility Note】This remote control is a replacement and is only compatible with devices that use a scrolling code (blue LED). Please check the compatibility list before purchasing. It is not suitable for fixed-code systems (red LED)!【Exclusive Models】Exclusively compatible with the following 868MHz blue remote controls: HSE4-868-BS, HSE2-868-BS, HS4-868-BS, HS5-868-BS, HS1-868-BS, HSD1-868-BS, HSD2-868-BS.【Easy Programming】Copy the code from your original remote control or connect directly via the receiver. Caution: Only usable with scrolling code (blue LED)!【Reliable Technology】868MHz frequency, 4 channels & blue LED. Not compatible with other frequencies – despite a similar design. [Security & Quality] Controls up to 4 doors with rolling code protection. Robust metal design, durable and more aesthetically pleasing than plastic remotes. Note: Built-in rolling codes (blue LEDs)! If your original remote uses fixed codes (red LEDs), it will not work. Compatible Models: For HORMANN HS1-868-BS, HORMANN HS4-868-BS, HORMANN HS5-868-BS, HORMANN HSE1-868-BS, HORMANN HSE2-868-BS, HORMANN HSE4-868-BS, HORMANN HSP4-868-BS, HORMANN HSD2-868-BS, HORMANN HSS4-868-BS. Press and hold the button on the new remote. If you wish to register the code from the original remote, keep holding the button. Press another button three times until the red indicator light illuminates for 10 seconds, then release all buttons. Place the original remote as close as possible to the left side of the new remote. Press the button on the original remote. You must copy the code until the LED flashes alternately red and blue. Check if the LED on the new remote is flashing blue. If not, try to get as close as possible to the original remote. If the blue light on the new remote is flashing rapidly, the learning process is complete. Release all buttons. Please follow the same procedure for the remaining buttons. Reset method: Each button on the remote is assigned a new radio code by following these steps: Remove the battery for 10 seconds. Press and hold a button on the remote. Insert the battery. The LED will flash slowly blue for 4 seconds. The LED will flash rapidly blue for 2 seconds. The LED will remain lit blue for an extended period. When you release the button on the remote, all radio codes will be reassigned. Note: If the button on the remote is released prematurely, no new radio codes will be assigned. Frequency: 868.3 MHz Channels: 4 Code: Rolling Code Battery: CR2032 battery included 4.2 out of 5 stars 868MHz Gate Remote Control, Handsender for Hormann HSE2-868-BS, HSE-4-868-BS, HS1-868-BS, HS4-868-BS, HSS4-868-BS, HSP4-868-BS, 4 Channel Gate Remote Control (Pack of 3) Permanent link: Found a lower price? Let us know. We cannot match every price shown, but we will use your ideas to ensure our prices are competitive. Fields marked with an asterisk * are required.** 010203040506070809101112 01020304050607080910111213141516171819202122232425262728293031 *Enter the name of the store where you found this product* Please select a province Please select a province * 010203040506070809101112 01020304050607080910111213141516171819202122232425262728293031 Submit A comment on the 868.3 MHz remote control gate: How to program it? Specifications: Technical description Additional information Return policy Your opinion