9-Tooth Angle Gearbox 28mm, Universal Brushcutter Head Accessories, Gear Head for Brushcutters

🌱Model Determination - Determine the model by measuring the diameter of the control levers and checking if it is 26 mm or 28 mm. At the same time, count the teeth on the drive shaft and determine if there are 7 or 9 teeth. Based on these two measurements and observations, you can identify the exact model. (Allen keys may require some force to insert into some holes in the gearbox)
🌱Preventative with the Desserrage - The left-hand M10 x 1.25 (male) thread effectively reduces the risk of self-loosening caused by vibration or rotation, especially when the machine is rotated counter-clockwise; the thread is automatically tightened, significantly reducing the risk of loosening.
🌱Instructions from Installation - When installing the angle gear, be careful not to overtighten the clamping screws to protect the angle gear from damage. Grease should be applied before use and topped up after approximately 10 hours of operation to protect the internal gears from wear, thus effectively extending the service life of the work head. 🌱Robust and Durable - The gearbox is of robust construction and effectively protects the internal gears from external influences to ensure stable operation of the device. During use, you should regularly check the gear head for wear and ensure that all connections are tight.
🌱Single-ear tool head - The single-ear tool head has only one fixing screw, so you only need to drill one hole in the corresponding position on the device. If you have already used a single-ear tool head, you can save yourself the trouble of drilling new holes.