1/4
ABS + Copper Tire Pressure Monitor, Bluetooth 5.0 Tire Pressure Sensor, Supports Real-Time Monitoring for Android and iOS, IP67 Waterproof
Of which environmental contribution £0.01 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
Specification:
Bluetooth Version: 5.0
Core: for ARM MO
Operating Voltage: 3V
Working Current: 100μA
Standby Current: ≤2.2μA
Response Time: ≤5s
Waterproof Rating: IP67
Battery Life: 3 to 5 years
Single Sensor Weight: approx. 10g/0.4oz
Pairing Instructions:
Recommended Usage Method:
1. Open the app by scanning the QR code link. Scan the QR code card with the words "One-Key Binding" or scan the corresponding sensor ID code to complete the pairing.
2. Install and wait for the app to open. Install the sensors on the corresponding tires according to the sensor markings until installation is complete on each sensor.
Note: If sensor data cannot be obtained, please reinstall the sensor (install it slowly so that the air pressure is fully adjusted to the sensor).
Package List:
4 x Tire Pressure Sensors
4 x Screws
1 x Wrench
1 x Manual
Note:
1. Connects to mobile phones with Bluetooth 5.0 or higher. Does NOT connect to mobile phones with Bluetooth lower than 5.0.
2. Product displays are shown on mobile phones. While driving, be careful when viewing tire pressure and temperature on your mobile phone. If the tire pressure continuously decreases or increases, please stop the car and check for a problem with the tire. 3. This product can read tire pressure and temperature, but it cannot prevent sudden accidents caused by tires. It is important to use high-quality tires. Even a slight tire leak will cause tire pressure to decrease over time.
Bluetooth Version: 5.0
Core: for ARM MO
Operating Voltage: 3V
Working Current: 100μA
Standby Current: ≤2.2μA
Response Time: ≤5s
Waterproof Rating: IP67
Battery Life: 3 to 5 years
Single Sensor Weight: approx. 10g/0.4oz
Pairing Instructions:
Recommended Usage Method:
1. Open the app by scanning the QR code link. Scan the QR code card with the words "One-Key Binding" or scan the corresponding sensor ID code to complete the pairing.
2. Install and wait for the app to open. Install the sensors on the corresponding tires according to the sensor markings until installation is complete on each sensor.
Note: If sensor data cannot be obtained, please reinstall the sensor (install it slowly so that the air pressure is fully adjusted to the sensor).
Package List:
4 x Tire Pressure Sensors
4 x Screws
1 x Wrench
1 x Manual
Note:
1. Connects to mobile phones with Bluetooth 5.0 or higher. Does NOT connect to mobile phones with Bluetooth lower than 5.0.
2. Product displays are shown on mobile phones. While driving, be careful when viewing tire pressure and temperature on your mobile phone. If the tire pressure continuously decreases or increases, please stop the car and check for a problem with the tire. 3. This product can read tire pressure and temperature, but it cannot prevent sudden accidents caused by tires. It is important to use high-quality tires. Even a slight tire leak will cause tire pressure to decrease over time.
Features
- BrandTEHTUY
- Weight10 g
- MaterialCopper
- Pcs per pack4
- Wireless communication protocolBluetooth
You are here:


















