AC220v motorized brass ball valve, 3-way motorized ball valve, G1/2 port for regulating fan coil building automation

This motorized ball valve is primarily made of forged brass, making it reliable and durable. Easy to control, the valve opens when power is applied. After power is switched off, the valve body closes automatically and is equipped with a manual valve opening control mechanism. The three-way electric ball valve is suitable for controlling the flow rate of fan coil units. Features: The three-way electric ball valve is suitable for controlling the flow rate of fan coil units. Compact structure, the valve body is made of brass and the drive is powered by a hysteresis synchronous motor. Easy to control, the valve opens when power is applied. After power is switched off, the valve body closes automatically and is equipped with a manual opening control mechanism. This motorized ball valve is primarily made of forged brass, ensuring reliability and durability. The ball valve and actuator are connected via a nut for quick installation and removal. Can be used in air conditioning and plumbing systems.

Specifications:

Port: DN15 G1/2
Drain hole diameter: 10 mm/0.39 in
Internal thread diameter: 20 mm/0.79 in
Drive motor: Hysteresis synchronous motor
Operating voltage: 220 V AC
Power consumption: ≤ 7.5 VA
Valve body pressure: 1.6 MPa
Permissible pressure difference: ≤ 0.13 MPa
Applicable media: Cold and hot water
Applicable average temperature: 2°C to 95°C
Applicable ambient temperature: 0°C to 60°C
On/Off time: approximately 10 seconds on, approximately 5 seconds off
Valve body connection: ZG internal thread
Stroke (theoretical value): 4.0 mm / 0.16 inches
Valve body: brass (forged)
Valve stem: 304 stainless steel
Sealing material: special rubber
Chassis d