Adjustable brass pressure reducer DN20 with manometer – 3/4″ connection for cold or hot water, precision and durability.

General Description

The adjustable brass water pressure reducer DN20 is used to regulate water pressure in domestic installations. It features a pressure gauge for precise pressure monitoring. This device is essential to prevent problems caused by excessive water pressure, such as unusual noises from the water heater or water leaks.

Technical Data

• Material: Brass
• Maximum load: 16 kg/cm²
• Maximum measuring range: 0.05 – 0.8 MPa (7.25 – 116 psi)
• Connection size: DN20
• Inlet pressure: 1.6 MPa (max.) / 232 PSI
• Weight: 425 g

Compatibility and Accessories

• Scope of delivery: 1 x pressure gauge, 1 x brass pressure regulator

Installation

For correct installation, it is important that the water flow direction matches the marking on the valve. The pressure regulator can be mounted horizontally or vertically. Ensure that the pressure gauge is connected to the designated interface to read the pressure intuitively and in real time. Operation: The pressure is adjusted manually using an Allen key. To adjust the water pressure, remove the protective cap and insert the key into the opening at the top. Turn it counterclockwise to decrease the pressure and clockwise to increase it. It is recommended to adjust the valve within a suitable pressure range to avoid damaging the pressure gauge.

Additional Information