Adjustable Brass Water Pressure Reducer DN20 - Built-in Pressure Gauge - Maximum Load 16kg/cm² - Horizontal/Vertical Installation - DN20-3

General description

The DN20 adjustable brass water pressure reducer is designed to regulate the water pressure in your domestic installations. It is equipped with a pressure gauge for precise pressure control. This device is essential to avoid problems related to too high water pressure, such as abnormal noises in the water heater or water leaks.

Technical specifications

• Material: brass
• Maximum load: 16 kg/cm²
• Maximum dimensions: 0.05 – 0.8 MPa (7.25 – 116 psi)
• Connector size: DN20
• Inlet pressure: 1.6 MPa (Max) / 232 PSI
• Weight: 425 g

Compatibility and accessories

• Package contents: 1 pressure gauge, 1 water pressure reducing valve brass

Installation

For correct installation, it is crucial that the direction of water flow conforms to that indicated on the valve.The pressure reducer can be installed horizontally or vertically. Make sure the pressure gauge is installed on the reserved interface for intuitive real-time pressure display.

Usage

The pressure can be adjusted manually using a hexagonal wrench. To adjust the water pressure, remove the protective cover and insert the key into the upper hole. Turn counterclockwise to reduce pressure and clockwise to increase pressure. It is recommended to set the valve within an adequate pressure range to avoid damage to the pressure gauge.

Other information