Adjustable brass water pressure reducer DN20 with pressure gauge, adjustable brass water pressure reducer (DN20-3/4 inch)

General Description The DN20 adjustable brass water pressure regulator is used to regulate water pressure in your domestic plumbing system. It is equipped with a pressure gauge for precise pressure monitoring. This device is essential for preventing problems caused by excessive water pressure, such as: B. unusual noises in the water heater or water leaks. Technical Specifications Material: Brass Maximum Load: 16 kg/cm² Maximum Dimensions: 0.05 – 0.8 MPa (7.25 – 116 psi) Connection Size: DN20 Inlet Pressure: 1.6 MPa (max.) / 232 PSI Weight: 425 g Compatibility and Accessories Scope of Delivery: 1 pressure gauge, 1 brass regulator Installation

For correct installation, it is crucial that the direction of water flow corresponds to that indicated on the valve.

The pressure regulator can be installed horizontally or vertically. Ensure the pressure gauge is connected to the designated interface for intuitive, real-time pressure readings. Operation: The pressure is adjusted manually using an Allen key. To adjust the water pressure, remove the protective cap and insert the key into the upper opening. Turn it counterclockwise to decrease the pressure and clockwise to increase it. It is recommended to set the valve within an appropriate pressure range to avoid damaging the pressure gauge. Additional Information