1/5

Adjustable brass water pressure reducer DN20 with pressure gauge, adjustable brass water pressure reducer (DN20-3/4 inch)

Product information

Description

General Description

The DN20 adjustable brass water pressure reducer is used to regulate water pressure in your domestic plumbing system. It is equipped with a pressure gauge for precise pressure control. This device is essential to prevent problems caused by excessive water pressure, such as: B. unusual noises in the water heater or water leaks.

Technical Specifications

Material: Brass
Maximum Load: 16 kg/cm²
Maximum Dimensions: 0.05 – 0.8 MPa (7.25 – 116 psi)
Connection Size: DN20
Inlet Pressure: 1.6 MPa (max.) / 232 PSI
Weight: 425 g

Compatibility and Accessories

Scope of Delivery: 1 pressure gauge, 1 brass pressure regulator

Installation

For correct installation, it is crucial that The water flow direction must correspond to that indicated on the valve. The pressure regulator can be installed horizontally or vertically. Ensure the pressure gauge is connected to the designated interface for intuitive, real-time pressure readings. Operation: The pressure is adjusted manually using an Allen key. To adjust the water pressure, remove the protective cap and insert the key into the upper opening. Turn it counterclockwise to decrease the pressure and clockwise to increase it. It is recommended to set the valve within an appropriate pressure range to avoid damaging the pressure gauge.

Additional Information

Features

Brand
COOCHEER
Pressure
10 bar
Material
Brass
Adjustable
Yes
Pressure regulation type
Pressure reduction

Advice from

How to control water pressure?

Pressure reducers, booster pumps, pressure switches, meter regulators and pressure gauges are all required for the proper operation and control of water pressure in individual dwellings and buildings. To avoid too low or too high water pressure, follow the advice in this guide!

Read our guide

You are here: