AIPERQ Jeffergarden Adjustable Infinite Cycle Timer Switch On/Off Relay Module (DC12V, 0-15min)

1. This is a time-delay relay module with high-precision, stable, and reliable performance.
2. It supports two modes: single-use (mono) mode and cycle mode. You can easily switch between modes by adjusting the jumper.
3. There is a wide time range that you can set; both the start and stop times are adjustable.
4. It is ideal for controlling alternating cycles or repetitive on/off cycles for equipment and product burn-in testing.
5. Widely used in timer operating equipment, machine repetitive test circuits, aquarium intermittent pumps, etc.

Specification:

Features:
This is a time delay relay module with high-precision, stable, and reliable performance.
Supports 2 modes: single-use (mon) mode and cycle mode. You can easily switch between modes by adjusting the jumper.
There are many voltage and time ranges to choose from, and the "on" and "off" times are adjustable.
It is ideal for controlling alternating strokes or repetitive on/off cycles for equipment and product burn-in testing.
Widely used in timer operating equipment, machine repetitive test circuits, aquarium intermittent pumps, etc.
Features:
Type: DC5V,0-15min/DC5V,0-60min/DC12V,0-15min/DC12V,0-60min/DC24V,0-15min/DC24V,0-60min(optional)
Max. Load capacity: 10A 250VAC, 10A 30VDC
Size: 70*20mm/2.75*0.78"
Time error:
T1 (relay turns on for the delay time), T2 (relay turns off for the delay time)
Single-time mode (jumper OP3):
1. When the module is powered on, upon triggering, the relay turns on, delays T1, and then the relay turns off.
2. When triggered during the delay process, it will immediately stop the delay.
Cycle mode (jumper OP4):
1. When the module is powered on, upon triggering, the relay turns on, delays T1, then turns off, delays T2, and then turns on again. This cycle repeats. T1 and T2 are defined by two adjustable resistors. respectively.
2. When triggered on the delay process, and triggered again, it will immediately interrupt the delay.
How to set the time quickly:
The time can be set quickly by measuring the voltage (Uc) across the resistor. Take a 5V 15min module as an example. If Uc=2V, time=2V/5V*15min=6min.
Package contents: 1 time relay module.