AIPERQ Solar Panel Water Pump with 5W Fountain Nozzle Kit, 380L/h Pond Pump, 10ft Cable for Outdoor Garden Bird Bath

Features:

1. Superior Performance: Solar water pump with a 5W solar panel and a 2.5W water pump. Maximum lift: 180 cm / 5.9 ft, maximum flow rate: 380L/h. Water spray height: 75 cm / 2.5 ft.
2. It can charge and spray water simultaneously during the day.
3. Multiple Spray Modes and Light Detection Function: The solar fountain pump is equipped with 6 double-layer nozzle accessories, providing a superior and varied spray effect. It will automatically stop working when night is detected.
4. Built-in water level monitoring function: The solar pond pump can automatically stop working when there is no water, and it can restart immediately after adding water. This effectively prevents the water pump from idling, which would reduce its lifespan. 5. Easy to use and carry: Solar panel with premium aluminum alloy frame; simply place it in a dry location in sunlight and it's ready to go. Water-resistant for outdoor use. Compact and lightweight, our solar pump is easy to carry. Widely used for gardens, swimming pools, and ponds.

Specification:

Specification:
Main Material: Plastic + Aluminum Alloy
Solar Panel: 10V/5W
Water Pump: DC10V/2.5W
Maximum Lift: 180cm/5.9ft
Maximum Flow Rate: 380L/H
Water Spray Height: 75cm/2.5ft
Cable Length: 3 meters/9.8ft
Panel Size: 275*175mm/10.8*6.9in
Product Weight: 800g/1.8lb

Package List:

1 * Solar Panel
1 * Pump
1 * Spray Base
1 * Nozzle Kit
1 * Manual

Note:

1. Please assemble the product according to the instructions.
2. Please place the solar panel in a suitable location to ensure it is not blocked by other objects. When the solar panel receives sufficient sunlight, the water pump will start within 3 seconds.
3. The height of the water spray depends entirely on the intensity of sunlight, as there is no battery inside. When sunlight is weak, the water pump will not run continuously but will automatically start repeatedly until the sunlight reaches a certain intensity, then it will automatically restart.
4. When the water pump is placed in water for the first time, there may be insufficient water volume due to air trapped in the pump impeller. It is recommended to wait until the water pump is spraying water normally before connecting the nozzle.
5. The water pump must be completely submerged in water during use and cannot be left dry for extended periods.
6. Please keep the water source clean and clean the water pump regularly.