1/4
AIPERQ Universal Brushcutter Head Load E Go Head 130mm M10X1.25 - for Stihl, Husqvarna, Stiga
Sold by re-green GmbH and 1 other seller
You may also like
Compare with similar items
Product information
Description
General DescriptionIt can be adapted to all Stihl, Husqvarna, Stiga and many other brands. Not suitable for electric trimmers. Simple charging system – Tap & Go.Technical SpecificationsCord flow system: Interchangeable reinforced aluminum eyeletsReinforced steel buttonReinforced plastic structureHead with D.130M10 x 1.25 fittingInner insertMaximum 4 mm round line1 x 7 m refill of 3 mm round lineCompatibility and AccessoriesUniversal for Efco and Oleomac brushcuttersFor all other brushcutters, check compatibility or purchase suitable insertsInstallationAlign the eyelets. Pass the line through the head via one eyelet and out the opposite side until you have two edges of the same length. Turn the molded knob counterclockwise. The head is ready for use.UsageUse the interchangeable reinforced steel knob for increased wear resistance. The thread is compatible with round diameters from 2.4 to 4 mm or square diameters of 3.5 mm.
Features
- BrandAIPERQ
- Length10 cm
- Width20 mm
- Weight500 g
- MaterialMetal
Advice from
Brushcutter head buying guide
Brushcutter heads form an important part of any brushcutter as this is where the nylon line, metal blades or circular blade is fitted. Before fitting your brushcutter with a new cutting head, it's important to think about the power of the tool and the type of vegetation you want to tackle.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}