Aloy Aluminum Mini Pneumatic Beveler - 45 Degree Chamfering Machine with Replacement Blades for Metal Deburring (6 R Inserts + 6 C Inserts + 6 Bearings)

Durable Material: The upgraded version of the metal bevel grinder, the new design adopts a new chrome-plated aluminum shell with high-quality bearings and blades for smoother deburring and chamfering. Adjustable speed and angle: rotating speed: 30,000 rpm; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min. Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade. Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times.Alloy steel baffle, safety buckle and metal button for safe use.
Chamfer and ARC angle: Rounding and beveling are possible by changing the inserts (2 types of inserts are optional).Suitable for different angles, such as straight edge chamfering, inner and outer round hole chamfering, and irregular chamfering for metal cutting and round R side.
Application: The pneumatic chamfering machine can be chamfered in the narrowest and shallowest space, suitable for different angles, such as straight edge chamfering, inner round hole chamfering and exterior.;Durable material: The upgraded version of the metal bevel grinder, the new design adopts a new chrome-plated aluminum shell with high-quality bearings and blades for smoother deburring and chamfering.;Adjustable speed and angle: rotating speed: 30,000 rpm; chamfering capacity: C0.1-C1.5; ARC angle: R0.1-R1.5. Adjustable depth: 0.1mm-0.9mm; air consumption: 0.4/min.Equipped with 1-5 air intake setting, the chamfering machine can be freely adjusted to the appropriate intake speed for use. Use the matching wrench to easily adjust the chamfer size and replace the blade.;Safety Assurance: The safety switch is used to prevent accidental contact to protect the user's safety at all times. Alloy steel baffle, safety buckle and metal button for safe use.;

Features:
ARC angle: R0.1-R1.5.
Chamfering capacity: C0.1-C1.5.
Rotation speed: 30,000 rpm.
Reversible depth: 0.1 mm-0.9 mm.
Chamfered opening: ≥ 8 mm.
Intake connection: 6.35 mm.
Minimum plate thickness: 3 mm.
Air inlet adjustment switch: 5 speeds.
Air consumption: 0.4 m³/minute.

How to replace the blade:
Use a hex wrench to loosen the plum screw, remove the baffle plate, remove the blade screw with a ring wrench, remove the old blade and replace it with a new one.

Use and maintenance tips:
1. Before using the new machine, please inject pneumatic oil and inject about 4°C into the air inlet. After continuous use for about 3 hours, about 4°C is also injected into the air inlet.

2. After injecting pneumatic oil, allow the machine to idle for about ten seconds (do not operate) and allow the internal parts of the grinder to be lubricated as a whole before continuing.

3. This is an air compressor (air pump) for mechanical use. The power of the air compressor is about 6-8 kg.Generally, most of the compressed gases in a traditional air compressor contain water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter inside the machine for a long time. The appearance of adhesion slows the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic oil should be introduced into the air inlet, and the machine can be used normally after slowing down for about ten seconds.

Package contents:
1 chamfering machine
6 R inserts
6 C inserts
6 auxiliary bearings.
1 EU connector.
2 adjustable wrenches