Alternator For Audi A6 Avant 2.0 TDI 2005-2008 180 Amp TG17C024 03G903016A Front

Application
For    Audi    A6 (C6)    2.0 TDI    BVG    09.05-06.06
For    Audi    A6 (4F2, C6)    2.0 TDI    BNA / BRF    07.04-09.08
For    Audi    A6 (4F2, C6)    2.0 TDI    BLB / BRE    07.04-09.08
For    Audi    A6 Avant (4F5, C6)    2.0 TDI    BLB / BRE    06.05-09.08
For    Audi    A6 Avant (4F5, C6)    2.0 TDI    BNA / BRF    06.05-09.08

OE/Part number
03G903016A, TG17C024, TG17C054, LRA03176, 401442801, 401442802
401442800, 437542, 439549, 0986084250, 0986084250, CA1910IR

Specification

Type: Alternator
Condition: New
Voltage: 12V
Amperage: 180A
Grooves: 6-Groove Pulley
Placement on Vehicle: Front

Feature
1. MaXpeedingrods Alternator is made from 100% new components,  never Compromise on Used/Refurbished one.Our alternators provide reliable power for every journey—whether on main roads, country lanes, or remote tracks
2. This alternator provides high efficiency and reliability, ensuring stable power supply for your vehicle. It utilizes modern design and manufacturing technologies to deliver excellent performance and provide reliable power for various electrical equipment and charging systems.
3. The robust and precision CNC machined design to reduce friction, vibration and noise, reducing the need for frequent replacements. Rotors and stators are calibrated and then sealed with secondary insulating coating to help prevent shorts.
4. Built to strict quality control standards 100% factory tested, including load tests, voltage regulation, cycling tests, and heat resistance tests. Engineered with premium brushes and fault-resistant parts for significantly longer-lasting alternators.

Package Included
1 *Alternator

HOW TO REPLACE AN ALTERNATOR?
1. Disconnect the negative battery cable
2. Take off the intake hose, mass airflow sensor, and air filter.
3. Loosen the belt tensioner.
4. Remove the belt from the pulley.
5. Loosen and remove the alternator.
6. Remove dust and oil from the installation position.
7. Install the new alternator.
8. Replace the bolts, and reattach all connections.
9. Reinstall the belt.
10. Connect the intake hose and reinstall the mass airflow sensor
11. Reconnect the negative battery cable

When The Alternator Makes A Noise, You Need to Operate
1. If  the noise of the alternator is mainly concentrated in the speed change  stage of the automobile alternator, check the alternator belt first, and  adjust or replace it.
2. If  the noise mainly occurs in the front and rear parts of the automobile  alternator, it may be that the bearing lubrication of the alternator has  a problem.
3. If  the noise mainly appears in the middle of the automobile alternator and  obvious vibration sense can be observed,there is friction between the  stator and rotor of the automobile alternator.The alternator can be  disassembled for adjustment or component replacement.

Note
* Please check your model and part number carefully before ordering.
* The brand names used above are for compatibility reference only.