Aluminum Butyl Sealing Tape 50mm x 5m, Waterproof Tape, High Temperature Tape, Roof Repair, Leak Repair, Bitumen, Waterproof Patches, Self Adhesive

Versatile Use: Our butyl tape can be used to repair house leaks, roof cracks, window sill leaks, water drainage, plumbing, exterior and interior of RVs, bathrooms, tunnels, subways, window and boat seals, glazing, pipes and roofing. Durable Materials: Resistant to high and low temperatures, abrasion and peeling, good insertion, good elasticity, impact resistance, waterproof, flame retardant and aging resistant. Waterproof adhesive tape; no additional glue is needed.Easy to use: Simply peel off the protective film and stick the butyl tape where needed. Double-sided adhesive tape has very strong adhesion. Once stuck to the surface, it is not easy to peel off.Be careful to remove only a small portion of the protective film at a time.Professional Butyl Rubber Adhesive Tape: This film effectively reflects UV rays, has a strong butyl adhesive, provides stable performance in contact with water, provides airtight sealing, withstands high temperatures up to 80°C and does not deform. Product Description Specifications: Material: Butyl Rubber Dimensions: 50mm (width) x 5m (length) Quantity: One roll Product Features: This aluminum foil tape is suitable for all exterior waterproofing projects and can be applied to wood, stone, plastic, steel, concrete, etc. glass. It has a wide range of applications and solves various water leakage problems. Usage: 1. Clean dust, gravel, etc. around cracks (plasterboards in sunny weather). 2.Measure the appropriate length and prepare it for installation after cutting. 3. Remove the protective film, stick it on the crack, peel it off and seal it. 4. After completion, do not let it come into contact with water or tear to avoid affecting the waterproofness. Tools required for construction (not included): tools, cleaning products, scissors, spare tools, gloves. p>> Construction notes: 1. Whether water enters buildings, pipes or containers, sealing and repairing leaks must be done on the water side. Before construction, be sure to clean the working surface of dust so that the base remains clean and the joint can fit well. It is recommended to seal a crack in cement 10-15 cm wide.