1/4

Shower Tray Bath Basin Flexible Waterproof Seal Strip Upstand Sealant - 3.8m

Product out of stock

Product information

Description

General description

This Shower Tray Bath Basin Flexible Waterproof Seal Strip Upstand Sealant is designed to transform any flat top shower tray or bath into a tiling upstand option. It creates a watertight seal between the tray and the wall, making it an essential waterproofing solution for bathrooms, showers, kitchens, and other areas where a waterproof seal is crucial. The flexibility of this product makes it suitable for new builds, repairs, or renovations.

Technical specifications

Length: 3.8m

Installation

Before starting, ensure a technically competent installer undertakes the installation.

Tools and materials required (not supplied): Damp cloth, scissors, small roller (or other appropriate tool), silicone sealant (or other suitable sealant).

Remove the protective film from the edge of the tray where the seal strip will be attached, leaving it over the base to protect the tray's surface during installation.

Wipe the surfaces clean with a damp cloth, allow to dry, and then wipe with the IPA wipe supplied in the kit.

Cut the strip to the required length, ensuring it is at least 20mm longer than needed.

Peel back approximately 20cm of backing from the black adhesive strip and attach it to the edge of the shower tray, ensuring it is square and protrudes at least 20mm above the edge.

Use a small roller to firmly attach the seal strip, removing any bubbles or creases, especially at the corners.

Gradually remove the cover strip in sections while rolling on the seal to ensure it attaches firmly and squarely to the edge of the tray without gaps.

Trim off any excess strip.

Install the shower tray in the correct position and tile over the seal strip.

Apply a protective bead of silicone or other suitable flexible sealant between the tray and the tile.

Finally, remove the remaining protective film over the rest of the shower tray.

Features

Brand
MX
Length
380 cm
Material
Silicone
Mounting method
To screw
Type of shower tray accessory
Sealing kit
ManoMano Reference
ME30239231
MMID
400266777040
Product code
WA3
EAN
5017706771290

Customer reviews

1,0

/ 1 Reviews

Reviews verified by ManoMano

TTom

Published on 24/08/2023, United Kingdom

Aqua seal is not adequate for the job. Not standard I usually buy. Haven’t used it as cant guarantee it will do the job

Advice from

Shower tray buying guide

Shower trays are an essential part of bathroom design. Walk in or low profile trays are enclosed by a shower screen and/or door and equipped with a shower head, hose and riser rail kit. By contrast, wet room trays are installed with an overhead shower head and form the base of a walk in shower. Read on to find the right shower tray for you.

Read our guide

You are here: