Attachable Storage Hooks, Garage Organizer, Practical Wall Mounts, Mop and Broom Holder, with 20 Hooks, 4 Rails 41cm Long for Garden Tools, Garage, Shed, Basement, Storage Room

[20 Non-Slip Hooks] The hook rack is made of ABS material, which is rustproof, sturdy, waterproof, moisture-proof and corrosion-resistant. Sufficient screws ensure its durability. Each bar is 41 cm long, and the four bars together measure 164 cm. Each hook has a non-slip vinyl-coated pin to prevent items from falling. [Load Capacity] Tool organizer with high load capacity. The load capacity of the plastic pins and the 5-shaped metal hooks is up to 3.6 kg and 6.8 kg respectively, when assembled correctly. [Space Saving] Various tools such as set squares, rakes, shovels, brooms, mops and any tool with a handle can be hung on the 5-shaped metal hooks. The plastic hook is suitable for hanging clothes, cables, cleaning supplies, etc. Save space and keep your kitchen, garage, and workshop organized. [Package Contents] 4 x 41cm ABS rails, 20 x galvanized steel hooks with vinyl-coated non-slip pins, 20 x pins, 4 x connectors, 4 x wall mounting holes, 20 x screws, 20 x pins. Recommended mounting location: Concrete or wooden walls. Make sure there are no cables or water pipes on the wall. [Easy Installation] Balasis Wall Mount: The adjustable ABS rail of the trolley system has a fixed hole for custom mounting. You can extend the guide rail as needed using connectors or complete it with a connector. Recommended mounting location: Concrete or wooden walls. Make sure there are no cables or water pipes on the wall. [Applicable and Adjustable] The storage system is versatile. It is ideal for hanging shovels, spades, rakes, and other garden tools in garages, basements, or sheds. It can also be used in workshops, utility rooms, and other tool storage areas with rods. Assembly Steps 1. Select a mounting location and mark the drilling points. 2. Drill 6mm diameter holes into the surface at the marked points and insert the wall plugs. 3. Align the screw holes with the inserted wall plugs and secure the rails with metal screws. 4. Attach the plastic hooks and pegs to the slots. NOTE: The rails can be extended with connectors if necessary. Or connect the rails with a connector.