Automatic drip irrigation kit with 149 pieces, 30 m/100 ft, automatic irrigation system for greenhouse and garden--DTEKGAZ

1. Multifunctional: Our drip irrigation kit includes two spray nozzles. It is suitable for automatic plant watering, garden irrigation, greenhouse irrigation, and general garden watering. An efficient and economical solution for plants and crops. 2. Easy installation, no digging or laying of water pipes required: Soak the hose end in hot water for one minute before connecting the fittings. This facilitates installation, and the hose will fit snugly after cooling. You can cut the hose to the desired length. 3. Connecting the drip irrigation components: Connect the 6.35 mm drip hose to the main water line. The other end connects directly to a transmitter, which delivers the water to the plants. The irrigation hose provides water directly to the plants, reducing water waste and ensuring that the plants receive the amount of water necessary for growth and development. The shrink wrap is convenient. 4. Water saving: The drip irrigation system saves up to 75% water. The precision irrigation system delivers the right amount of water slowly and precisely where your plants need it – directly to the roots. Versatile use: This automatic irrigation kit is ideal for misting, watering lawns and patios, roof cooling, agriculture, vegetable gardening, greenhouses, flower beds, pond irrigation, and more. Garden irrigation kit; garden irrigation system. This irrigation kit consists of a sprinkler and a distributor. Simply connect it to the tap to water your potted plants, vegetables, greenhouse plants, and flower beds in a variety of ways. Weight: 910 g. Color: Black. Material: Rubber and plastic. Contents: 2 capillary tubes (4 mm, 15 m) for water supply. 1 three-way ball valve for hose separation. 2 hose distributors with quick-connect couplings. 1 quick-connect fitting. 1 anti-drip strap on the tap. 30 distributors with red caps and adjustment options. 20 orange nozzles with adjustable distributors. 30 T-fittings for hose connections. 20 flat T-fittings for connections. Hose. 30 securing rods for hose connections. 2 capillary plugs for sealing hose ends. 10 hose fittings. Note: 1. The amount of water in the condenser depends on the water pressure and other factors. Low water pressure reduces efficiency. It is recommended to use multiple hoses simultaneously. Each hose is connected to multiple condenser heads depending on the water pressure. 2. Immerse the hose ends in hot water for one minute before connecting them to the fittings. This facilitates connection and stabilizes the hose after cooling. 3. If possible, use a self-tapping screw, as the rubber hose may loosen under high water pressure.