Automatic Faucet Sensor IPX6 Infrared Water Saver Automatic Detector Infrared Water Saver Sensor

Description

• 【Easy to Install】6 types of connectors for most kitchen faucets. Easy installation requires no additional costs for the plumbing system. USB charged, it can be used for up to 6 months when fully charged.
• 【Touchless Sensor Adapter】2 sets of detection zones, two water modes, fast 0.25-second induction. High water efficiency, energy saving, and environmental protection.
• Automatic sensor: Simply place your hand under the spout and the water will flow automatically until the sensor stops. Avoid direct contact with pathogenic germs found on the appliance.
• 【2 sensors】Lower sensor for short-term water needs – if the sensor enters the lower detection zone (within a 10cm radius), water begins to flow. When the sensor is turned off, water stops flowing.
• When the sensor enters the lateral detection zone (within a 5cm radius), water escapes. The current lasts three minutes. If the sensor re-enters the lateral detection zone during the drainage process, the water can be stopped at any time.

💡Note: Due to manual measurement, the size may have a 2cm/1 inch error; due to different screens and angles, the color and size may be slightly different, thank you for your understanding!

Our service: We strive to provide customers with high-quality products and services. If you cannot find the size or the appropriate size, please contact us by email to find a link for you, or you can contact us by email to change the size or size after placing the order. We will reply to your emails as soon as possible within 24 hours. We also welcome you.