Automatic Paint Tester Coating Thickness Gauge with Digital LCD Backlight Display Black Vertical Screen

General Description

This automatic paint tester is equipped with an integrated magnetic induction and a dual-principle vortex probe, allowing it to automatically identify the metal substrate being measured. It accurately calculates the thickness of the coating, whether paint or film, on metal surfaces in a non-destructive manner. Thanks to its backlit digital LCD screen, it is easy to read the data even in dark environments.

Technical Specifications

• Measuring range: 0 ~ 2000 µm
• Accuracy: (3% + 1 µm)
• Resolution: 0 µm ~ 99.9 µm (0.1 µm), 100 µm ~ 999 µm (1 µm), > 1000 µm (0.01 mm)
• Zero calibration: supported
• Statistics: Average, minimum, maximum, number
• Units: µm, mm, mils
• Minimum convex radian: 5 mm
• Minimum concave radian: 25 mm
• Minimum surface to be measured: Diameter 20 mm
• Minimum substrate thickness: 0.2 mm
• Maximum measurement speed: 2 readings per second
• Power supply: 2 x 1.5 V batteries (not included)
• Operating environment: Temperature: 0 ~ 50 °C, Humidity: 20 ~ 90% RH (non-condensing)
• Storage environment: Temperature: -10 ~ 60 °C, Humidity: 20 ~ 90% RH (non-condensing)
• Size: 113 mm x 53 mm x 24 mm

Usage

To use the tester, follow these steps:

• Prepare the parts to be tested.
• Stay at least 2 cm away from the metal object, then press the button to turn on the device.
• Place the probe vertically on the surface to be measured until the beep is heard. The measured value is displayed on the screen.
• Lift the probe at least 2 cm away from the measured part to perform the next measurement.
• It is recommended to reset the instrument to zero before each test.
• If the automatic shutdown function is enabled, the instrument will turn off after 3 minutes of inactivity.

Other information

• Material: ABS
• Color: Orange, black (optional)
• Screen: horizontal, vertical (optional)