Automatic Voltage Identification Solar Controller, LCD Display, Off-Grid System, Power Generation Systems for Rechargeable Lithium Battery, Lead-Acid Cell, 100

Warning: Keep the product away from children's toys and other items to avoid accidental ingestion or choking by children.
 
This product is a multifunctional LCD solar controller with clock display function and 7 working modes. 7 working modes adjustable function, charging mode, light control mode, light control + timer control mode, general control mode, manual control mode, timing control mode and test mode, where the test mode is only for factory testing.

Features:
Large LCD screen, supports battery working status display, solar panel working status display, mode control display, charging output status and each parameter display, normal and fault status display.
Seven operating modes are: charging mode, light control mode, light control + timer control mode, general control mode, manual control mode, timing control mode, and test mode. The test mode is for factory testing only. Four types of automatic voltage identification: it will automatically identify DC12V/24V, DC36V, and DC48V. Auto-focus tracking charging, high charging efficiency, continuous detection during charging, and bidirectional tracking. Equipped with a time setting function and a parameter value setting function. The charging control function is not limited by any mode restrictions; as long as the charging conditions are met, it will charge. immediately.
The discharge control function varies depending on the control mode, in the absence of faults, as described below:
Charge mode: no discharge under any conditions.
Light control mode: when the controller detects night, discharge starts after a 10-minute delay; when day is detected, discharge stops after a 10-minute delay.
Light control + timer control mode: when the controller detects night, a 10-minute delay begins to start the discharge and a countdown begins. When the timer reaches 0, the discharge stops. The maximum delay time is 23:59.
General control mode: If there is no fault, it will maintain the discharge state.
Manual control mode: Use "▼" to start or stop the discharge.
Timer Control Mode: Turns the discharge on and off at regular intervals. Test: Same as the light control + timer mode, but with a timer of less than 10 minutes. The controller has low-voltage protection. If you still need to discharge, you can press and hold the "▼" button for 5 seconds. You can still exit the mode, but you will only be able to manually stop the discharge. Note that this function may damage the battery; please be careful.
Features:
Name: Solar Controller Material: Plastic + Aluminum Current: 80A, 100A (in (option)
Input Voltage: DC12V/24V, DC36V, DC48V
Output Voltage: DC12V/24V, DC36V, DC48V, DC5V/1.5A*2USB
Operating Temperature: -25℃ to 55℃
Item Size: 198 * 180 mm / 7.80 * 7.09 inches
Package Size: 195 * 184 * 66 mm / 7.68 * 7.24 * 2.60 inches
Package Weight:
80A: 900g / 1.98lb
100A: 1150g / 2.54lb

Package List:
1 * Solar Controller
1 * Instruction Manual
EAN: 752874941520
EU Responsible Party
YOOVEI TECHNOLOGY
118-130 avenue Jean Jaures 75169 Paris CEDEX 19
MichelleWangYurui@gmail.com