1/5
Automatic Water Level Controller, Liquid Level Sensor without AC100 to 260 V XKC C352 3P for Tank Water.
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
Product information
Description
Specification:
Item Type: Automatic Water Level Controller
Material: ABS
Model: XKC C352 3P (Fully automatic water level control and inlet/overflow detection)
Input Voltage: AC100V to 260V, 50 or 60Hz
Working Current: Working current ≤ 110mA, Static current consumption ≤ 20mA
Power Rating:
Resistive loads up to 1.6kW (overload or three-phase loads require an AC contactor)
Inductive loads less than 1kW (overload or three-phase loads require additional AC contactors) Inductive loads are loads with inductive coils, such as motors, solenoids, solenoid valves, etc.
Alarm Output: 800W (resistive) normally open or normally closed output
Output Mode: Normally open or normally closed output
Input Signal: Inductive signal input
Induction Head Interface Voltage: DC12V
Operating Temperature: -20 to 105℃
Size: Approx. 115 x 90 x 40 mm / 4.53 x 3.54 x 1.57 inches
Package List:
1 x Automatic Water Level Controller
1 x Screwdriver
How to Use:
Direct Installation and Use
Note:
If you are not handy and not very good with electricity, please do not buy this controller, as it requires some skills in electrical engineering.
Item Type: Automatic Water Level Controller
Material: ABS
Model: XKC C352 3P (Fully automatic water level control and inlet/overflow detection)
Input Voltage: AC100V to 260V, 50 or 60Hz
Working Current: Working current ≤ 110mA, Static current consumption ≤ 20mA
Power Rating:
Resistive loads up to 1.6kW (overload or three-phase loads require an AC contactor)
Inductive loads less than 1kW (overload or three-phase loads require additional AC contactors) Inductive loads are loads with inductive coils, such as motors, solenoids, solenoid valves, etc.
Alarm Output: 800W (resistive) normally open or normally closed output
Output Mode: Normally open or normally closed output
Input Signal: Inductive signal input
Induction Head Interface Voltage: DC12V
Operating Temperature: -20 to 105℃
Size: Approx. 115 x 90 x 40 mm / 4.53 x 3.54 x 1.57 inches
Package List:
1 x Automatic Water Level Controller
1 x Screwdriver
How to Use:
Direct Installation and Use
Note:
If you are not handy and not very good with electricity, please do not buy this controller, as it requires some skills in electrical engineering.
Features
- BrandOTHERS
- IP ratingIP65
- Width150 mm
- Length150 mm
- MaterialPlaster
Advice from
Submersible pump buying guide
A submersible pump is essential equipment if you want to source water from a well, channel wastewater into a collector or water your plants using pondwater. Simple to use and requiring limited maintenance, follow this guide to help you choose your perfect pump.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}