Automatic water pump pressure control Electronic switch

Features:1.This intelligent electronic automatic water pump controller can start or stop the pump based on detected data regarding the water source status, water volume, and pipeline pressure changes.
2.The electrical components and the pipe are completely isolated for safety.
3.It can automatically maintain constant pressure in the pipeline as well as a constant water flow rate.
4.Automatically turns on the pump when the water valve is opened and turns off the pump when the water valve is closed or in case of water shortage.
5.It can control various types of pumps, widely used in homes, yards, gardens, greenhouses, etc.
Specifications:Features:
This intelligent electronic automatic water pump controller can start or stop the pump based on detected data regarding the water source status, water volume, and pipeline pressure changes.
The electrical components and the pipeline are completely isolated for safety.
It can automatically maintain constant pressure in the pipeline as well as a constant water flow rate.
Automatically turns on the pump when the water valve is opened and turns off the pump when the water valve is closed or in case of water shortage.
It can control various types of pumps, widely used in homes, yards, gardens, greenhouses, etc.
Specifications:
Maximum Current: 10A
Maximum Power: 1.1 kW
Maximum Pressure: 1 MPa (10 bar)
Inlet/Outlet Diameter: 1 inch
Package Includes:
1 x Controller
Note:
Please note that the new and old types of this product will be sent randomly, and please make sure you do not mind this before ordering.
During installation, the distance between the switch and the pump should not exceed 10 meters. If the pump and switch are too far from the water flow, the switch may not start. It is recommended to use 1.1 kW water pumps.