Baguette of Welding, 50 pieces electrodes of welding welding in aluminum to low temperature of 2,0 mm - Rod of welding easy to fondre - Resistance to the corrosion (33 cm)

Easy to use : electrodes of welding suitable for the welding complete by the jeunes operations of welding. It not requires that a small device heated. The resistance to the welding after the welding is generally more high that the resistance of the metal of base it-same.

No powder to weld required : you not have not need of use of other thermoscellage of flow with of froms of aluminum because that the core of welding and the coating are the base. Very practical and easy to weld.

High performance : in using the powder internal, the wire of welding has a effect of welding sufficient and smooth. It has also a point of fusion bottom, a high weldability and a resistance to the corrosion, a conductivity thermal high, a conductivity electric high and of excellent properties of processing.

Effect of welding : it can repair the aluminum alloy that some person pensent not can not be repairs, same the metal white strongly corroded or contamine by the oil can be repairs.

Applications : this wire of welding in aluminum to low temperature can weld almost all the metals cols, y including the aluminum, the aluminum alloy, the make of aluminum, the aluminum alloy and of magnesium, etc. High strength, good forgeabilité and good resistance to the corrosion.

Features :

Material : aluminum.

Color : silver.

Point of fusion : 647 ? 658.

Diameter : 2 mm.

Contained :

50 sons of welding in aluminum (33 cm/50 cm).

Instructions :

Steps 1 : polish the surface by a cleaning physical.

Steps 2 : chauffez the surface of the metal of base up to this that the temperature atteigne the temperature of work of the wire of welding of 450 °C or to the-on it, so that the welding can be formee by the wire of welding to conductivity thermal of the metal of base, and that the wire of welding to the flame not must not be used, and that when the temperature of surface is sufficient, the wire can well circulate and penetrate.

Steps 3 : when of the repair of the aluminum relatively end, it enough of heat the aluminum to a temperature of work appropriate, then of use a wire and a brush metal for frotter of before in rear for former a welding.

Attention :

1. The surface must be rincant.

2. The temperature of the metal of base must be maintenue to 450 °C during the process of welding, and the temperature not can not be more low.

3. Avoid of use of flammes for burn déliberément the wire, after that the temperature atteigne 450 °C, the wire dépendra naturally to the conductivity thermal of the material of base.