Battery charge control, protection board, starting voltage adjustment for solar power of the direct output wind turbine charger

Features:

1. This product is suitable for 6-60V battery charging control and can configure charging voltage modes and stop charging voltage
2. Suitable for use in home charger, solar power, wind turbine
3. 6-60v input charger at IN end, connect storage battery at OUT end
4. Is quite smart, helping to save electricity and safe
5. Automatic power cut-off, save energy, extend battery life

Specifications:

Features:
This product is suitable for 6-60V battery charging control and can configure charging voltage modes and stop charging voltage.
Suitable for use in home charger, solar power, wind turbine.
6-60V input charger at IN end, connect storage battery at OUT end.For example, by setting the start voltage to 12V and the stop voltage to 15V, when the voltage is below 12V, the relay closes and sends the charger's charging voltage to the battery.When the voltage is above 15V, the relay disconnects and stops the charging discharge..
It's quite intelligent, helping to save electricity and safe.
Automatic power cut-off, energy saving, extended battery life.
Specifications:
Input Voltage: DC 6-60V
Display Accuracy: 0.1V
Control Accuracy: 0.1V
Output Type: Direct Output
Voltage Error: +/-0.1V
Applications: 6-60V storage battery
Size: 81*54*24 mm / 3.19*2.13*0.94 inches

How to Use:
When setting the voltage value, the start button adjusts it upwards, and the stop button adjusts it downwards.
1. Setting the starting voltage: In normal display voltage mode, press the start button.The button will display the starting voltage of the load; press and hold for 3 seconds, the digital display will flash; you can then toggle the button on or off to set the starting voltage value.2.Setting the stopping voltage: In normal display voltage mode, press the button to display the stopping voltage; press and hold for 3 seconds, the digital display will flash; you can then toggle the button on or off to set the stopping voltage value.
3. Factory reset: When powering on, press the power button simultaneously; the digital display will show 888, which represents the factory reset settings.
Package includes:
1 x Battery charging control module