You may also like
Compare with similar items
Product information
Description
1、By setting the upper limit voltage and the lower limit voltage, you can use this battery charging module for automatic charging control.
2、When the battery voltage is less than or equal to the lower limit voltage, the relay is turned on, and the charger starts to charge the battery; when the battery voltage is greater than or equal to the upper limit voltage, the relay is disconnected.
3、When the charging time control is not turned on, it will record a complete time, which will be displayed when entering time display interface.
4、The charging time will be cleared when recharging (relay is turned on) or resetting.
5、When exiting after setting the parameters, if the lower voltage limit is greater than or equal to the upper limit voltage, the system will flash "ERR" as a reminder. 6、This control board is attached to the battery. If the battery is not connected, the system will display "nbE" in the bottom line as a reminder; if the voltage is lower than 1V, it will also display "nbE".
Item Type: Battery Charging Control Module
Product Model: HCW-L30A
Control Voltage: DC6-60V
Control Current: ≤30A
Control Accuracy: 0.1V
Output Type: Direct Output
Voltage Error: ±0.1V
Scope of Application: All kinds of batteries and lithium batteries.
Appearance Size: Approx. 92 x 45mm / 3.6 x 1.8in
1 x Battery Charging Control Module
Features
- BrandSTUNACY
- Amperage30 A
- Type of solar charge controllerPWM
- ManoMano ReferenceME221594407
- MMID859655103788
Wind turbine buying guide
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}