Battery-free 3-in-1 soil tester for garden and agriculture: measures pH, moisture, and sunlight

General Description

The 3-in-1 soil tester is an essential tool for gardeners and farmers, allowing for the accurate measurement of soil moisture, pH, and light intensity. This battery-free device is designed to be lightweight and portable, making it easy to use outdoors. Thanks to its dual-needle sensing technology, it provides a fast and accurate reading of moisture, pH, and light levels, helping to optimize the plant growing environment.

Technical Specifications

• Soil moisture measurement: 1 to 10

• Light intensity measurement: 0 to 2000

• pH measurement: 3.5 to 8

• Probe dimensions: at least 10 cm deep

• Color: green

Installation

• 1: Select the moisture, pH, or light mode as needed.

• 2: Insert two-thirds of the probe into the soil (at least 10 cm).

• 3: Adjust the probe until the pointer on the dial wobbles slightly.

• 4: Check the moisture, pH, or light levels on the dial after 10 minutes.

• 5: Remove the probe from the soil and wipe it clean after each use.

Usage

• For moisture: Values 1-3 indicate watering is necessary, 4-7 indicates moderate moisture, and 8-10 indicates overly wet soil.

• For light: The measuring range is 0 to 2000; the higher the value, the stronger the light intensity.

• For pH: A value of 7 is neutral; a lower value indicates acidic soil, while a higher value indicates alkaline soil.

Other information

• Do not use to test the pH of water or other liquids.

• Do not force the probe into very hard soil.

• Do not leave the tester in the soil for an extended period.

• If the soil is too dry and the indicator does not move, water it before testing.

• The package contains: Soil pH/moisture/light tester * 1.