Bielas Bielle Connecting Rods Conrods for Honda Civic EX Coupé 1996–2000 5.394"

Application
for Honda Civic CRX D16 ZC SOHC VTEC D Series

1986–89 for Acura Integra (USA)
1986–89 for Acura Integra (Australia)
1988–1991 for Honda Civic Si, CRX Si
1990-1991 for Civic EX (4dr), Civic Wagon RT4WD
1988–1991 for Civic for GTi in New Zealand
1988–1989 for Civic models in Europe (ED4, ED7)
1995 for Civic models in New Zealand (EG4)
1988–1995 for Models in South Africa
1998–2000 for Honda Civic GX
1996–2000 for Honda Civic HX
1996 for Honda Civic EX (sedan Peruvian version)
1996–2000 for Honda Civic VTI
1992–1995 for Honda Civic Si
1992–1995 for Honda Civic EX, EX-V
1992–1995 for Honda Civic ESi (European Market)
1993–1995 for Honda Del Sol Si (US)
1993–1996 for Honda Del Sol ESi (European)
1992-1995 for Honda Civic RTSi
1996–2000 for Honda Civic EX Coupé
1991–1993 for Honda Civic Ferio EJ3
1992–1995 for Honda Civic EJ1
1992–1995 for Honda Domani MA4
1993-1997 for Honda del Sol (Si)

Dimensions
Center to center length: 137mm/5.394"
Big end diameter: 48mm/1.890"
Small end diameter: 19mm/0.748"
Big end width: 22.8mm/0.898"
Small end width: 18.2mm/0.717"

(Note: Please confirm the dimensions before purchase the connecting Rods)

Feature:

1. TüV Certification Con Rods；
2. Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing；
3. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade ；
4. H-Beam design reduces weight without compromising strength；
5.Heat-treating & Shot-peened for remained consistent and strong. Shot-peened finish to remove potential for stress risers;
6.100% CNC machined,Precision rod cap alignment dowels；
7.Bores finished to +/- .01 mm；
8.Balanced to within +/- 1 g per rod ；
9. Each rod is magnetic particle tested to ensure free of flaws ；
10.100% X-rayed, sonic tested

Specification:

Quantity: 4 Pieces a set
Bolts: Including Genuine 3/8" ARP 2000 bolts (Note: Extra cost for upgrading to ARP L19 bolts)
Material: Forged 4340 aircraft chrome moly quality steel for racing
Weight Tolerance: Balanced to +/- 1 gram in set
HP Rating: Around 600-800HP
The big end bores are honed to a +/-.01mm(+/-.0004 in ) tolerance
The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi,
and the optional ARP L19 material at 260,000 psi is available as an upgraded product.
Street Performance: ：Advertised Horsepower Rating： 200HP/piece
Sport Performance:  ：Advertised Horsepower Rating： 250HP/piece

*Important note:
Please be kindly reminded that you may need to notch the block when fit to D16Y7, D16Y8, D16Z6 engines. Please consider this before purchasing. If there is any questions, please feel free to contact us.