1/5
Black Car Adjustment for Adjustable Shock Absorber Wear on the Armrest for Hand Suspension of the Reger for Auto Parts
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
Product information
Description
1. With adjustable, shockproof, and wear-resistant properties, this is an RV replacement.
2. Can be installed on the right side of the driver or passenger seat; the recess size is 55 mm / 2.16 inches.
3. Commonly used in cars, caravans, motorhomes, boats, trucks, excavators, engineering vehicles, etc.
4. These comfortable armrests provide a more comfortable ride.
5. If the armrest is not a vehicle-specific type or does not fit, an adapter card may be required, and you may also need to drill new mounting holes.
SPEC:
Item Type: Car Armrest
Material: PU, Foam, Plastic, Metal, Polyurethane Integral Foam
Key Component Type: PU Foam, ABS Bracket, Metal Mounting Bracket
Color: black
Adjustable range: 0-120°
Mounting size: approx. 55 mm / 2.16 inches
Position: Right side of driver or passenger
Arm: Full polyurethane foam
Features: Adjustable, shock-resistant, wear-resistant
Recommended installation height: The distance between the cushion and the bottom of the armrest is 11 cm / 4.33 inches (or 2 cm / 0.79 inches depending on your needs)
Instructions:
Install on the right side of the
Installation instructions:
1. Open the back cover.
2. Please sit in your most comfortable position.
3. Drill two holes at the mark you made.
4. Use screws to attach the armrest bracket to your vehicle.
5. Make a small hole in the foam and remove the foam insert.
6. As for the cover, repeat the previous step.
7. Secure the armrest to the outside of the part and fix it with screws.
8. Place it on the cover.
Packing list:
1 x Car armrest
2 x Fixing screws
2 x Nuts
2 x Gaskets
Note:
The product is fixed with screws, and the mounting holes are spaced 5.5 cm apart, so you can drill your own holes for installation. Before purchasing, please check if the armrest mounting location and width support the spacing of the armrest mounting holes for drilling the fixing.
2. Can be installed on the right side of the driver or passenger seat; the recess size is 55 mm / 2.16 inches.
3. Commonly used in cars, caravans, motorhomes, boats, trucks, excavators, engineering vehicles, etc.
4. These comfortable armrests provide a more comfortable ride.
5. If the armrest is not a vehicle-specific type or does not fit, an adapter card may be required, and you may also need to drill new mounting holes.
SPEC:
Item Type: Car Armrest
Material: PU, Foam, Plastic, Metal, Polyurethane Integral Foam
Key Component Type: PU Foam, ABS Bracket, Metal Mounting Bracket
Color: black
Adjustable range: 0-120°
Mounting size: approx. 55 mm / 2.16 inches
Position: Right side of driver or passenger
Arm: Full polyurethane foam
Features: Adjustable, shock-resistant, wear-resistant
Recommended installation height: The distance between the cushion and the bottom of the armrest is 11 cm / 4.33 inches (or 2 cm / 0.79 inches depending on your needs)
Instructions:
Install on the right side of the
Installation instructions:
1. Open the back cover.
2. Please sit in your most comfortable position.
3. Drill two holes at the mark you made.
4. Use screws to attach the armrest bracket to your vehicle.
5. Make a small hole in the foam and remove the foam insert.
6. As for the cover, repeat the previous step.
7. Secure the armrest to the outside of the part and fix it with screws.
8. Place it on the cover.
Packing list:
1 x Car armrest
2 x Fixing screws
2 x Nuts
2 x Gaskets
Note:
The product is fixed with screws, and the mounting holes are spaced 5.5 cm apart, so you can drill your own holes for installation. Before purchasing, please check if the armrest mounting location and width support the spacing of the armrest mounting holes for drilling the fixing.
Features
- BrandOTHERS
- Pcs per pack1
- ColourBlack
- Height35 cm
- Width15 cm
You are here: