Black Stainless Steel A2 Suction Cup Hooks, Reusable, No Drilling Required, for Bathroom and Glass

Superior Suction: The base of the suction cup hook is made of high-quality PVC plastic (a soft silicone material with some adhesion) with excellent flexibility and air-release properties. This allows the suction cup hooks to better adapt to different surfaces and improve suction power. The maximum load capacity of the hooks is approximately 5 kg. 304 Stainless Steel: The bathroom suction cup hooks are made of stainless steel, which is water-resistant, rust-resistant, and corrosion-resistant, even with prolonged use in humid environments. Reusable: After removing the suction cup hook, please wash the suction cup's adsorption layer with water, dry it, and then you can reinstall and reuse it. You can change the position of the hooks at any time, or easily remove and store them when not in use, without leaving any marks on the wall. Easy installation: After cleaning and drying the area where you want to stick the hook, tear off the protective film from the suction cup, press the suction cup hook against the wall, press firmly for a few seconds to expel any air, then turn the suction cup hook knob cover clockwise to complete the installation of the bathroom towel hook. Remove the suction cup hook counterclockwise. Wide application: The suction cup hook is suitable for smooth, dry, flat, and non-porous surfaces, such as glass, mirrors, tiles, stainless steel, metal, artificial panel walls, etc. It cannot be used on rough, greasy, dusty, or porous surfaces. For example: concrete walls, lime walls, wallpaper, painted walls, and logs.