CHAMFER MACHINE SIGMA SIMPLE BEVEL TILING BEVEL 36A5D + ANGLE GRINDER CAT DX37

SIGMA art. 36A5D Chamfer Machine for edges and accurate bevel working SIMPLE BEVEL seriesReady for angle grinder 700 - 1400W. Complete with art.72D + 72E0050 disk capacity max. 100mm/4”With spindle thread M14 SIMPLE BEVEL Precision chamfer machine on gres porcelain tiles or Marble, Granite,Glass. Sliding resting on the edge of the tile, ensures the uniformity of the bevel along the entire length of the edge worked, following exactly the physiological curves of the slab; which would not be possible with a cutter guided by a rigid guide. Bevel from 0 to 12 mm ( from0 to 6mm on porcelain gres) Adjustable to any angle from 22 ° to 90 °. The BULL is obtained with multiple passes at different angles. (r. 6 native). Allows finishing of the lateral edge of the tile (max.30mm)..The machine 36A5D is suitable for the following processes:• Finishing and polishing of lateral edge on tiles, cut with blade. 2 to 30mm thick tiles. Machining at 90°. Using grinding wheel art. 72E0200/-0800/-1500• Bevel , finishing and polishing of tiles edge, cut with blade. Angle 22°÷90°. Back miter width 1÷4mm, on gres porcelain material, Using grinding wheel art. 72E0050/-0200/-0800/-1500• Creating BULL NOSE on tiles edge, cut with blade. BULL width: 3÷7mm, on gres porcelain material, Using grinding wheel art. 72E0050. (For large bullnose, we recommend Art. 37A2D)• Finishing and polishing of tiles edge, previously chamfered with blade. Angle 22°÷90°. Chamfer width: 1÷18mm on gres porcelain material. Using grinding wheel art. 72E0200/-0800/-1500• Beveling, Finishing and polishing of tiles edge, cut with blade. Angle 22°÷90°. Bevel width 4÷18mm.All materials: roughing grindstone Article 72, with multiple steps 3mm deep. Finishing and polishing with grinding wheel art. 72E0200/-0800/-1500. (For large bullnose, we recommend Art. 37A2D)ANGLE GRINDER 115 / 125MM 750W CAT DX37Technical specifications:Voltage: 230-240V ~ 50HzPower output: 750WDisc size: 115mmRevolutions per minute: 12000 / minMachine weight: 2 KgFeatures:Slide on / off switch withprotection against accidental startingTree lockAnti-vibration auxiliary handle for comfortand operator safetySoft startDust resistant with removable mesh filtersKey holder on the auxiliary handleAccessories:1pc auxiliary handle with service key1pc cutting protection cap1pc grinding protection cap