Coating Thickness Gauge, GM200A 01.80mm Professional Automotive Paint Coating Thickness Tester for Car and Industrial Application A

Specification:

Item Type: Coating Thickness Gauge

Material: plastic + electronic components

Target measurement: the thickness of the non-metallic coating on the metal surface

Measuring range: 0 ~ 1.80 mm / 0 ~ 71.0 mil non-metallic coating on a metal surface

Accuracy: ± 0.1 mm

Power supply: 2 AAA batteries (not included)

Minimum base diameter: 50 mm

Critical base thickness: 0.5 mm

Display resolution: 0.01 mm / 1 mil

Working temperature: 0 ~ 40°C

Working humidity: 10 ~ 95% RH

Product size: approx. 6.2 x 3.5 x 10.5 cm / 2.4 x 1.4 x 4.1 inch (± 1-2 cm)

List of packages:

1 x thickness gauge

1 x pillar

1 x manual

6 x coating thickness film

【Car Mode】 Since the GM200A vehicle model has built-in data, the user cannot perform calibration. In car mode, it can directly measure the coating thickness of iron, aluminum and aluminum substrates. zinc, suitable for measuring the coating thickness of automobiles. Pacifier Clip Chain for Baby.

【User Mode】 In GM200A user mode, after calibrating the metal substrate, the user can only measure the coating thickness of this metal surface, but not other metals. For example, if you calibrate a substrate in iron, you cannot measure the coating thickness of an aluminum substrate.

【User Model Calibration】 According to the user model calibration, the diameter of the GM200A substrate should be ≥50mm and the thickness of the substrate should be ≥0.5mm. The critical thickness of GM200A relative to the base metal (≥0.5mm).

【Measurement Setup】 GM200A user mode calibration will not affect car mode. GM200A car mode is the factory default setting. The GM200A factory default setting uses an iron substrate to calibrate the model user.

【Edge Effect】 The GM200A is sensitive to sudden changes in the shape of the sample surface. Therefore, it is unreliable to measure near the edge or inside corner of the measured object. The GM200A can only measure coatings non-metallic.