Coilover Front Suspension Kit for VW Transporter T5 T6 T26 T28 T30 2003-

maXpeedingrods' MXR-B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.

Fitment

for T26 / T28 / T30

For VW Transporter T5 2003-2015

For VW Transporter T6 2015-present

Including engines 2.0, 3.2V6, 1.9TDi, 2.0TDi, 2.0BiTDi, 2.5TDi.

excluding T32

Specifications

Front Lowering: 30-95mm depending on the vehicle models

Damping: Fixed Damping

Spring Rate Front: 8.5 kg/mm (476 lbs/in)

Spring length Front: 215 mm   

Top mounts: Front top mounts required

Spring Preload advised: 7-10 mm

Shock Type: Twin Tube

Package included:

2x Front coilovers
2x C spanners

Dimension

Package size : 70*27*20 cm
Weight: 12900 g

Feature

1.  Lower height adjustable (depends on vehicle models)
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.