Coilover Kit for Renault Clio B Mk2 1998-2005 1.2 1.4 1.5 1.6 1.9 2.0
Recommended Price
Product information
Description
maXpeedingrods B1 series is ideal for those who want to change the old worn-out strut but improve handling at the same time. It features height adjustable and maintains the OE ride quality to the greatest extent.
Notice: No Top Mount Included.
Applications
for Renault Clio MK2 1998-2005
Important
Front lower mount side hole spacing: 58mm
Specifications
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Damping : fixed damping
Top mount: not included
Spring rate Front: 7 kg/mm (392 lbs/in)
Spring rate Rear: 5 kg/mm (280 lbs/in)
Front spring inner diameter: 62 mm
Rear spring inner diameter: 46-145-65 mm
Spring length Front: 160 mm
Spring length Rear: 140 mm
Spring Preload advised: 7-10 mm
Damping rod diameter Front: Φ 20 mm
Damping rod diameter Rear: Φ 12.5 mm
Damping thread Front: M52×1.5 mm
Twin -tube Diameter Front: 52 mm
Twin -tube Diameter Rear: 40 mm
Rod End Thread Front: M14×1.5 mm
Rod End Thread Rear: M14×1.5 mm
Package included
2x Front coil-overs
2x Rear coil-overs
2x C spanners
Package size : 70*50*20 cm
Weight: 21100 g
Feature
1. 0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install, Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).
Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. Regular maintenance is recommended for the coil-over. Applying WD-40 or a suitable protective spray every 3–4 months can help keep the components clean and moving smoothly.
Features
- BrandMAXPEEDINGRODS
- Shock absorber onlyNo
- Complete strut assemblyYes
- MaterialMetal / Aluminium
- AdjustableYes
- Strut typeSuspension
- Type of vehicleCar
- ManoMano ReferenceME249819434
- MMID691146747599
- Product code4JSFDG
- EAN6941441749407