Coilovers Suspension Kit For Chrysler 300C Dodge Magnum 5.7L 6.1L SRT8 Wagon

Notice: No Top Mount Included. Modification Required If You Use OE Top Mount

Application

For Chrysler 300C 5.7L V8 RWD Saloon 2005-2010

For Chrysler 300C SRT8 6.1L V8 RWD Saloon 2005-2010

For Chrysler 300S 5.7L V8 RWD Saloon 2010

For Dodge Magnum R/T 5.7L V8 RWD Wagon/Estate 2005-2008

For Dodge Magnum SRT8 6.1L V8 RWD Wagon/Estate 2006-2008

Note: for Chrysler 300 C require drilling the hole of the front OE top mount to fit.

Specification:

Quantity: 2x front+2x rear + 2x C- Spanner 

Height adjustable: Yes, lowering 0-25mm depending on the vehicle models

Damping : Not adjustable

Top mounts: Front and rear OE top mounts required

Spring Rate Front: 8 kg/mm（448 lbs/in)）

Spring Rate Rear: 10 kg/mm (560 lbs/in)

Spring length Front: 235 mm

Spring length Rear: 275 mm

Front spring inner diameter: 64-89 mm

Rear spring inner diameter: 74-77 mm

Spring Preload advised: 7-10 mm

Package included

2x Front coil-overs
2x Rear coil-overs
2x C spanners

Feature:

1.  0-25mm(depends on vehicle models) lower height adjustable
2. Dust boot, solid rubber bump stops
3. Weight Saving Aluminum Components And heavy duty Steel Lower Mount Brackets
4. Simple install,  Easy to adjust.
5. Use the vehicle's original upper mounts (not included in our product kit).

Notice:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.